Mechanics may work indoors or outdoors but mostly it is a garage with facilities. These facilities may be cranes, pressure washers, screw jacks, etc. It may get too hot or too cold in these places. They may also be exposed to hot auto parts resulting in minor burns, bruises, and cuts.
As they work under the automobile it requires to get into awkward cramped places and positions. They may require to wear protective gear such as earplugs, goggles, masks, etc. As work with chemicals such as chemical degreasers, antifreeze, etc. daily.
They may be exposed to high decibels of screeching machinery such as cutters, polishers and revving engines. This can be distracting and uncomfortable when it is on a daily basis. They may or may not have adequate lighting too.
After studying these working conditions preventive measures are taken. The employers ensure the mechanics work in a well-ventilated temperature-regulated workshop. The workspace is degreased and pressure washed regularly for hygiene and safety purposes.
Appropriate gear is recommended for mechanics so that they do not slip and fall. Besides the right kind of boot construction and orthotics ensure that their bodies and skeletal systems can endure the working hours.
There are safety compliance institutions around the world such as ASTM and ANSI in the United States of America. There are ISA and CSA in Canada and the ISA in Europe. All these institutions recommend similar requirements featured on work boots for mechanics.
Read our latest guide about the best puncture resistant work boots.
Types Of Work Boots For Mechanics
There are two types of work footwear for men – boots and shoes.
What are they?
Boots not only cover the foot but also the ankle and shin. These may be made of heavy material in the sole and tough leather or other materials like Gore-Tex in the upper.
They are meant to protect the lower extremities from snow, water, and hazardous chemicals. Their construction also supports the foot and legs through the arduous tasks. Nowadays they are also worn for fashion.
Traditionally they are made of leather and rubber or a combination. They are made of plastic, suede, PU leather, etc.
There are various types according to their construction – such as – chap boots, wedge boots, thigh-length boots, knee-high boots, hip boots.
By their styles, there are mukluks, cowboy boots, Chelsea boots, wellington boots, rigger boots, Russian boots, gumboots, valenki, etc.
Read our complete guide about the best work boots for mechanics.
What are they?
Shoes cover the feet and usually stay below the ankle. Some dress shoes may reach the ankle and are called high-top shoes or high tops. There the sole is made of heavier material the upper may be plastic or leather.
Shoes are meant to comfort and protect the foot through various activities of your day.
Shoes used to be made of leather, canvas, and wood. Nowadays they are made of petroleum-derivatives such as plastics, PU, rubber, etc.
There are various types of shoes such as athletic, casual, dress, dance, orthopedic, work, etc.
Here are the names of a few styles of shoes – mules, oxfords monk-straps, slingbacks, slip-ons, court shoes, moccasins, espadrilles, brogues, etc.
Work boots for mechanics are classified by their style and type.
They are as follows;
Safety boots incorporated with safety toes and other safety features. Enlisting a few – a slip-resistant sole, insulation, penetration resistant, etc. Metal-free safety boots may have plastic or carbon toes. These make these boots lighter and EH-resistant.
Safety shoes are modified styles of the shoes mentioned above only they are fitted with safety features as seen in the boots.
Safety trainers appeal to most users. This is because they are appearing casual. Thus, they fit into most social set-ups and occasions. While bringing all the safety features on a work boot.
Riggers are called the stalwarts of industrial footwear. They are pull-on boots. The name rigger comes from the oil rigs of the North Sea – where they are a standard issue.
Wellingtons are made of rubber making them suitable for work in wet conditions. They are ideal for industries where disinfectants are used for hygiene. These may be industries such as chemical, medical, food, etc.
Clogs are traditionally made of beech wood and fitted with steel toes. They may have thin rubber soles for traction and to quieten the tread.
Features on the Work Boots for Mechanics
The best work boots for mechanics help prevent accidents and mishaps. The correct work gear is imperative and the correct use of it makes your workshop safe. You never know when a heavy piece of machinery falls on your foot.
Safety toe – not only offer protective space for the toes but also stability. Safety toes can be classified by their shape and the material they are made of.
By shape – They may be asymmetric or symmetrical safety toes fitted in a boot. The asymmetrical safety toes may be customized for the right and left foot. These caps are wider and taller at the hallux and taper off at the little toe. The symmetrical safety toe caps are fitted into the rounded toe of your boot.
By material – The safety toes may be made of steel, alloy, aluminum, composite or carbon nanofiber. Steel toes have been an industry standard for years. This is because they protect from falling objects and heavy equipment.
The seven Ps offered by these work boots are;
Protection from the weather – These are waterproof work boots or are lined with such a material. They may also be lined with insulating material to protect from chill, wind, snow, water, sleet, and sun.
Protection from falling objects – The safety toe can withstand 75 pounds of pressure when an object falls from a distance of three yards.
Protection from electrical hazards – The automobile may have exposed wires, live batteries, and power conduits. The mechanic may also be exposed to a build-up of static electricity leading to an electric shock. Non-conducting materials are used to make these boots. They can withstand 18000 volts of electrical shock for 60 seconds in dry conditions.
Protection from cutting hazards and punctures – These boots have soles and insoles that cannot be punctured. These plates are made of the same material as the safety toe. They form a shield around your foot and prevent nails and other sharp objects from impaling it.
Prevention of trips falls and slips – The outsoles of the boots are made of non-slip material such as PU or rubber with aggressive lugs. These materials and designs offer traction while lugs offer a firm grip. This prevents slipping, falling or tripping – the usual job injuries. The design material also prevents the buildup of dirt and debris between the lugs.
Prevention of fatigue – The upper and the outsole work together to offer support and comfort. The insole and midsole cushion the foot and return energy to the foot. The ergonomics keeps you fresh and productive all day.
Probably mandatory – It is compulsory to wear Personal Protective Equipment as per the Safety Institutions guidelines and the Labor department directives. You are most likely to be sent home if you do not wear PPE.
A cushioned insole is usually made of EVA foam that molds to your foot contours. It may have air channels in it to allows the flow of air between your foot and the boot. This evaporates sweat keeping you cool and comfortable. It may also cushion the blow of a falling object.
Slip-resistant outsole is made of Polyurethane, rubber or Vibram. These offer slip-proof traction even on oily or wet surfaces.
Moisture wicking lining absorbs sweat and keeps your foot dry. Most mechanics work in a hot and humid environment. This prevents the buildup of odor in the boot. A dry foot is non-slippery and allows better traction on the floor.
Waterproof and water-resistant materials like Denier nylon, Gore-Tex, etc., are used to make light and waterproof footwear.
Oil resistant – The mechanics work boots are exposed to petroleum products such as oil, diesel, grease, kerosene, etc. These oil substances cause the deterioration of the boot’s construction. These work boots are made to withstand such deterioration.
Insulated work boots are a blessing if the mechanic has to work outdoors on cold days. These boots have Thermolite or Thinsulate insulation. This insulation is put between the liner and outer material of the upper. The amount of insulation is expressed in weight – indicated in grams. The higher this number; the better the insulation.
Why does the industry need work boots for mechanics?
These boots bring three needs together for the mechanic – safety, comfort, and durability. Getting the right boots with optimal safety features. A construction that brings orthopedic benefits and comfort during long hours of work. And long-lasting durability of the materials used to build the boots.
What are the work conditions for mechanics?
Mechanics perform various physically challenging tasks daily. They are vulnerable to falling auto parts, tools, and heavy machinery. A boot fitted with a safety toe made of steel, aluminum, plastic, carbon, etc. would be suitable for them.
There may be water, oil, lubricant, coolant and similar cocktails on the floor. Hand and floor squeegees should swipe off most of the danger. But boots with rubber, PU or TPU soles with lugs should give you a better grip on the floor. Due to the oil-, slip-, abrasion- and water-resistant sole.
A stable comfortable footbed offers a steady base to stand on. Mechanics do heavy-duty lifting and pushing stable boots with good traction are a boon. The traction helps push and turn and pull things easily.
Do work boots for mechanics have insulation?
These work boots may be insulated with Thinsulate, thermolite, down, etc. Usually, it is Thinsulate that ranges between 200g to 800g. A boot with 200g of Thinsulate should suffice in the mild cold. While 800g of Thinsulate is for cold, icy and windy conditions.
Can you give special orders for work boots for mechanics?
Yes, these boots can be made to order for a custom fit and extended size. Shoe people may have high arches causing supination they need cushioned shoes. People with normal feet require stability shoes. People with flat feet need motion control shoes for pronation. Others may suffer from plantar fasciitis, bunions, sesamoiditis, etc.
Top 15 Best Work Boots for Mechanics in 2022
|1. Timberland PRO Men’s 47001
Shaft measures approximately 6 from arch
|2. Wolverine Men’s Overpass
|3. Carhartt Men’s CMF6366
Durable & Versatile
|4. Caterpillar Second Shift Steel Toe – P89135
Heel measures approximately 1.25″
|5. Thorogood American Heritage 804-4375
|6. RockRooster AK232Z AK245Z
||Static Dissipative, Non-slip TPU Outsole||$$||4.4|
|7. KEEN Utility 1021358
Waterproof, breathable membrane
|8. Wolverine W10698
|9. Thorogood Men’s 1957 Series 6- Inch Mock Toe
||Removable Ultimate Shock Absorption footbed||$$$||4.2|
|10. Oliver 65 Series 65394
||All-Terrain Dual Density Soling Technology||$$$||4.1|
|11. Caterpillar Threshold
Breathable leather upper
|12. Timberland White Ledge TB012135214
||Shaft measures approximately 4.75″ from arch||$$||4.1|
|13. Skechers for Work Workshire Condor
||Heel measures approximately 1.5″||$$||3.9|
|14. AdTec 9843
||Not Applicable sole||$$$||3.9|
|15. Magnum Men’s Response III 6.0
||Heel measures approximately 1.5″||$$||3.9|
Timberland makes boots for the great outdoors. The range covers hiking, walking, fishing boots, etc. As the demand for tough dependable work boots increased. Timberland Pro boots were made. These are the best work boots a mechanic could find. They will keep you comfortable on long and hard days anywhere. These rugged work boots are insulated, waterproof and cushioned.
Design & Materials
Timberland PRO Men’s 47001 also known as the Powerwelt are steel toe boots with a 6-inch shank. There is a metallic asymmetrical toe cap that meets the CAN/CSA-Z195-14 Grade 1 and ASTM F2413-11 I/75, ASTM F2412-11, and C/75 impact and compression safety standards.
These boots also meet the ASTM F1671-07 safety standards. This is the maximum waterproof protection that also carries the bloodborne pathogen resistance. They also meet the ASTM standards for electrical hazard protection.
The footwear has undergone several advanced treatments to waterproof the leather. This Ever-Guard leather is also abrasion-resistant. The inner liner is waterproof and breathable to stay dry. The zippers, gussets, and tongue are water-resistant too.
The boot has the Timberland Pro 24 x 7 Comfort System that offers support to the foot arch, cushions every step to reduce foot fatigue. The rugged yet light PU sole is oil, abrasion, and slip-resistant. The inner lining has an anti-microbial treatment that prevents odor.
Timberland PRO Men’s 47001 are engineered for comfort. They have a contoured tongue that is designed to relieve the lace pressure. There is a moisture-wicking mesh lining with antimicrobial odor control. There is a steel shank to protect your feet and lend structural support. The PU footbeds have contoured and open-cells.
These cells help distribute the pressure and allow airflow in the boot. The dual-density Ladder Lock PU outsoles have an aggressive tread design. This helps better grip, traction, and oil-, slip and abrasion resistance to the non-marking sole.
Timberland PRO Men’s 47001 has full-grained Ever-Guard leather upper. This waterproof upper encloses the steel safety toe fitted on the TiTAN last that offers a superior fit and protection. The boot brings you the mechanical and chemical bonding in the Goodyear welt-Cast bond construction. These boots are brown oiled full-grained leather. They are available in US size 7.5 to 15 in options – medium and wide. Each boot weighs 1.96 pounds.
Timberland PRO Men’s 47001 are supported by a 12-month warranty.
- Ever-Guard waterproof leather
- Steel toe
- Goodyear welt construction
- Mesh lining with antimicrobial treatment
- Dual-density PU sole
These work boots by Wolverine are durable and comfortable These are premium quality boots for both the sexes. These boots are available in black and brown. These colors are easy to maintain and coordinate with work apparel.
Design & Materials
The Wolverine Overpass features the Contour Welt technology for flexibility and comfort. The lugged outsole is made of lightweight rubber. The upper is made of premium-quality waterproof leather fitted with an abrasion-resistant toe. It also meets the ASTM standards for protection against electrical hazards. The boot has a moisture-wicking mesh lining that keeps the feet dry and cool. The Ortholite footbed is removable and it molds to your foot. The PU sole offers advanced comfort. There is a two-compound outsole made of PU and rubber that offers traction. The nylon shank offers extra strength.
The Wolverine Overpass brings you the Contour Welt technology which is the ultimate in flexibility and comfort. The feeling of freedom is enhanced by the lightness of the shock-absorbing lugged outsole made of rubber. You move lightly yet the feet are well protected. The boot is the fusion of all the innovative technology by Wolverine that enhance your performance and comfort. The Carbon Max safety toe is thinner and lighter but meets and exceeds all the ASTM standards for EH and compression. The sole, footbed, outsole, etc. are contoured to the foot. They bring you the Motion Max technologies that bend and flex at the focal points of your gait – keeping you comfortable. The boot has a breathable and waterproof membrane that keeps you dry and comfortable all day. You will find your size between 7 – 14 (US). The boots are available in wide and medium options, too.
The Wolverine Overpass is made of waterproof leather. The moisture-wicking inner lining and PU sole will last you a long time. The boot has a composite toe and nylon shank that will last you for years.
The Wolverine Overpass is supported by a 1-year warranty.
- OrthoLite footbed
- Rubber & PU outsole
- Nylon shank
- ASTM EH-rated Composite toe
Carhartt makes workwear since 1889. Their inventory has hats, jackets, fire-resistant clothing, shirts, vests, overalls, jeans. dungarees. coveralls and hunting clothes.
Design & Materials
Carhartt Men’s CMF6366 is brown and oil tanned. The boots are available in the medium and wide toe in US size 8 to 15. The shank is 3 inches high. The upper is made of genuine oil-tanned leather and has a lace closure. The boot has a FastDry moisture-wicking lining. There are composite toes to protect from stubbing toes and falling objects. There is a rubber toe over the safety toe and a heel bumper for protection and stability. There is an EVA midsole fitted with a PU insole to absorb shock and support. There is a rugged Flex rubber outsole for flexibility and traction. The boots meet the ASTM standards for protection against electrical hazards.
Carhartt Men’s CMF6366 will keep you comfortable whether you are climbing stairs, lying under a chassis, pulling the parts along the crane rail, walking on the greasy floor. These rugged work boots with a 6-inch shaft will keep your ankles, shank, heels, metatarsals, and toes protected. The safety toe, the rubber bumpers at the toe and heel, the layers of EVA, PU and rubber will absorb shock. The aggressive outsole will offer grip on the ladder rungs, uneven terrain, and cement floors. The boot is impact and compression resistant besides being shockproof.
Carhartt Men’s CMF6366 is made of tough leather, nylon mesh lining, flexible PU and rubber. There is built-in Rugged Flex technology that stretches and moves with your foot. The material of the boot is durable and it stretches and recovers its original shape.
Carhartt Men’s CMF6366 are long-lasting boots that not only goes well with the workwear but also casuals. You could work in the office, on the factory floor and have a stroll in the forest. without issues. The boots are supported by a yearlong warranty.
- Oil- & slip resistant
- ASTM compliant
- Rugged Flex technology
- Rubber sole for traction
These work boots by Caterpillar have evolved into a range of casual and industrial footwear. They stay true to their original goal of being with you every moment of your workday.
Design & Materials
Caterpillar Second Shift Steel Toe – P89135 is made of oiled full-grained nubuck leather. The boot has an engineered nylon mesh that lends comfort and breathability to the shoe. The boot has a steel shank for stability and support. There are removable PU sock liners that offer cozy comfort. The upper and the T3 rubber outsole are stitched together using the Goodyear welt construction. The slip-resistant outsole offers a better grip on all types of low traction surfaces. The boot has the steel toe in compliance with the ASTM safety standards. The steel toe offers classic protection against compression and impact. The EH protection against open circuits of up to 600V in dry conditions. The treated rubber with lugs dramatically reduces slips and falls.
Caterpillar Second Shift Steel Toe – P89135 is built for comfort, protection, and durability. The boots have rugged styling and high-quality leather. The boot is made of high-quality leather for a durable grip on the foot and protection. The breathable Climesphere insole, nylon mesh lining, removable PU sock offer all-day comfort. The leather upper is attached to the slip-resistant outsole by the Goodyear welt construction that has neat stitches that handle the shearing pressure of the moving foot. The nylon thread in the stitches is flexible it allows the foot to breathe. And prevents the water from flowing into the shoe. The steel toe is impact and compression resistant.
Caterpillar Second Shift Steel Toe – P89135 is made of tough durable materials like leather, PU, rubber, nylon mesh, and steel. Caterpillar sourced the best materials from around the world to make you these best and long-lasting work boots.
Caterpillar Second Shift Steel Toe – P89135 are supported by a 6-month warranty.
- Climasphere insole
- Steel shank
- Steel toe
- Nubuck leather
This is an 8-Inch Safety Toe-M width boots by Weinbrenner Shoe Company. Thorogood is a Union Made boot that is Berry Compliant. This means these boots are made in the country from the materials from the country. These boots are made in the two factories based in Wisconsin.
DESIGN & MATERIALS
Thorogood American Heritage 804-4375 are high-quality boots right for casual wear and the job. They have a Polyurethane MAXwear wedge sole. It is overlaid with a removable footbed for shock absorption. The boot is inlaid with the Poron comfort cushion insole. It gives additional support alongside the rubber midsole. This boot has a fiberglass shank and the MAXwear wedge. This wedge is slip-resistant to offers better traction on any floor. The leather upper is connected to the outsole by the Goodyear Welt construction applying a cotton-drill vamp lining. The full-grained leather has been tanned using tobacco oil.
Thorogood American Heritage 804-4375 is a job fitted work footwear. These are the American Heritage boots bring you comfort since 1892. These boots are made with your comfort and livelihood in mind. These job-fitted boots bring you innovation, craftsmanship, durability, and comfort. They are ideal for hardworking feet of linesmen, millwright, welders, sheet metal workers, mechanics, carpenters, electricians, fabricators, etc.
The MAXWear outsole outlasts the soles by other brands by 30%. This is a 90 slip-resistant outsole that is designed for durability and superior comfort. These boots can handle anything uneven terrain, slippery metal ramps, climbing ladders, etc.
Thorogood American Heritage 804-4375 is made of 100% oil-tanned leather. It has a synthetic sole and a shock-absorbing removable footbed. There is a cushioning insole to absorb and return energy to the foot while you walk, climb or remain on your feet. The fiberglass shank protects and gives shape to the shoe. The MAXWear outsole with a 90° heel is connected to the upper using the Goodyear welt construction. There is a lace-up assembly in the front. In aggregate the boot is made to tough durable materials. It works from all sides to protect and support your foot.
Thorogood American Heritage 804-4375 is available in two options – Tobacco Oil-Tanned and Trail Crazyhorse. They have safety toes. The boot shaft is 8 inches high. It is available in US size 5 to 15 in narrow and wide options. They are supported by a 45-day warranty.
- Electrical hazard resistant soles
- Removable footbeds
- Poron insole
- Slip-resistant MAXWear outsole
- Goodyear welt construction
Tonghe shoes have been producing these boots since the 1980s. They make work boots for officers. They are made out of calf leather, therefore, soft supple yet tough and durable. They have strived for years to make these waterproof boots a trusted brand in the USA.
DESIGN & MATERIALS
RockRooster AK232Z AK245Z is made of 100% leather inlaid with a steel toe cap. Your foot is hugged comfortably in full grained, oiled tumbled leather that is fitted onto comfortable insoles. There is another layer of contoured footbed that cradles the foot. The shank is 6 inches high. The boot is inlaid with CoolMax technology that wicks away moisture. This wicks away moisture keeping you dry and cool all day. The fiber structure offers insulation on cold days. The boot has the Poron Xrd impact protection to offer breathable comfort. These enduring boots are not bulky but lightweight. They have a static dissipating non-slip TPU sole. These soles are oil, slip, and abrasion-resistant.
RockRooster AK232Z AK245Z is easy to pull on using the lace-up system. The TPU outsole has aggressive lugs for better traction that offers a non-slip grip on any substratum. These are overlaid with Poron impact protection insoles. They have Microban protection that kills bad odor too. The Cool Max support is a moisture management system that has mesh linings that absorb moisture and dry quickly. There is Kevlar puncture protection in the footbed. This means your job site may be littered with shrapnel, nails, jagged metal pieces – the sole will not be punctured. The other comforts are the antistatic feature. And the boot is available in US size 7 – 15 in medium to wide options.
RockRooster AK232Z AK245Z has a tough Kevlar sole with a 100% leather upper. The boot is inlaid with moisture-wicking CoolMax meshes. There are the Poron insole and the TPU outsole. All these durable materials and construction are aimed towards protecting your foot and you. The boot will not only hold your foot secure but also protect it from sprains and other injuries. It also offers protection against impact, compression, and electrical hazard. The 8-inch-high shank has steel inserts to add to the comfort.
RockRooster AK232Z AK245Z is supported by a 180-day warranty.
- Safety toe
- Electric hazard protection
- Static dissipation
- Non-slip TPU sole
KEEN Utility is an American footwear brand. They also make socks, bags, socks, clothing, etc. The company was founded in 2003 by Rory Fuerst in Oregon, USA. KEEN Utility invented the signature black toe bumper that protects against stubs. This brand puts its values in motion to inspire themselves towards a monumental life. They create high-quality products to deliver an unforgettable brand experience.
DESIGN & MATERIALS
KEEN Utility 1021358 or Cody are made of leather and nylon mesh. The boot is padded with foam to offer support to the toes, shaft, tarsals, ankle, and heel. The boot is fitted with a soft toe cap that protects against impact. The boot not only meets the ASTM standards to protect against impact and compression. It also offers electrical hazard protection. There is a breathable waterproof membrane liner to absorb moisture. The siped rubber outsole is oil and slip-resistant. It disperses liquids quickly to increase traction. There is reflective webbing on the boots to increase visibility and safety.
KEEN Utility 1021358 aka Cody has the Keen ReGen midsole that cushions your foot. There is oil- and slip-resistant outsole made of rubber. These are hiker-inspired boots that hug your foot as you tighten the laces. Your foot is enclosed in a protective comfort of the asymmetrical safety toe. You walk confidently and securely on the slip-, oil- and non-marking rubber outsole. It also offers protection against electric shock and static buildup. You can work in any environment and be secure on your feet. If you have to repair an automobile on the road at dawn, dusk or dark – the reflective webbing improves visibility. The boot also has a metatomically designed footbed that is removable to wash. You can find your size in US size 7 – 15 and two widths – regular and wide.
KEEN Utility 1021358 – Cody is made of a durable leather upper and a rubber outsole. The protective soft toes work in tandem with PU footbed to return energy to the foot every time you wear the boots. The boot has the External Stability Shank and a shellback heel. These features along with the material and construction work together to offer long-lasting protection.
KEEN Utility 1021358 is supported by a one-year warranty.
- Shellback heel counter
- External stability shank
- Siped outsole
- Asymmetrical safety toe
These boots are also known as the Floodhand they are waterproof, 6-Inch Soft Toed Work Boots for women.
DESIGN & MATERIALS
Wolverine W10698 is made of full-grained leather upper. The outer looks premium quality while the inner lining keeps you dry and comfortable due to the moisture-wicking mesh. The boot is inlaid with cushion footbeds that mold to your foot. There are a rubber midsole and outsole that absorb shock and return the energy to the foot. This reduces fatigue and prevents orthopedic issues in the skeleton. The upper is fused to the outsole by the Goodyear welt construction. The foot is kept in place by a nylon shank with extra strength.
Wolverine W10698 has a tough yet comfortable upper made of waterproof leather. The boot is lined by a moisture-wicking mesh and the Goodyear welt does not allow any moisture to seep into the shoe. This means the interior of the boot will always be dry, cool and comfortable. The boot cushions the foot at the toe with a spacious toe box. The 6-inch shaft, vamp, and heel are cushioned to support the foot from all sides. The lace-up system tightens the boot around the foot in a snug fit. You will always be sure-footed on any surface due to the oil, slip water and abrasion-resistant outsole. The ladies can choose between dark brown and wheat color. The boots are available in US size 5 – 11 in two widths – medium and wide.
Wolverine W10698 is made of tough and durable materials. The leather is tough, durable and waterproof. It is easy to maintain. The Goodyear welt construction is replaceable when worn out. The rubber outsole is tough and long-lasting.
Wolverine W10698 is supported by a yearlong warranty.
- Waterproof leather
- Moisture-wicking inner lining
- Nylon shank
- Rubber outsoles
Enjoy the classic style of mid-century America in these re-issued circa 1957 boots.
DESIGN & MATERIALS
Thorogood Men’s 1957 Series 6- Inch Moc Toe is made of the rich Crazyhorse leather constructed to bring a smart look with the work uniform or favorite casual clothes. They boast the sturdy Goodyear Storm Welt construction. This means you will enjoy years of worry-free wear. The boots can be re-soled in case of wear. You will enjoy a lifetime with these boots. They have the MaxWear wedge outsole that offers good traction on slippery surfaces like mud, ice, and grass. The boot has a soft lining and a breathable waterproof membrane to keep your feet dry. There is a removable, memory foam footbed that molds to your foot all-day comfort. The classic styling facilitates the modern person who enjoys quality workmanship. The steel safety toe is ASTM compliant to protect your foot from compression.
Thorogood Men’s 1957 Series 6- Inch Moc Toe will cushion your foot on the rubber outsole, removable footbed, and X-Stream waterproof lining. The boot will hold your foot in the comfort of the full-grained supple leather upper and the flexible yet tough outsole. The lacing system will fit the boot snuggly around your foot for better gait and comfort.
Thorogood Men’s 1957 Series 6- Inch Moc Toe is made of full-grained waterproof leather. The upper is fitted with a steel toe that is ASTM-compliant for impact and compression. The boot has a moisture-wicking lining and a removable footbed that can be washed for hygiene. The fiberglass shank not only extends the life of the boot but also protects your foot. The vamp and heel are reinforced with another layer of leather. The MAXWear 90 slip-resistant heel offers grip on ladders, all kinds of floor, etc. The Leather upper is attached to the outsole by the Goodyear welt construction that is also waterproof and long-lasting.
Thorogood Men’s 1957 Series 6- Inch Moc Toe is supported by a 45-day warranty.
- Full grained leather
- Removable footbed
- Steel toe protection
- Fiberglass shank
- X-Stream Waterproof
From the mining fields of the Australian Outback, Oliver bootmakers have outfitted workers since 1887. The outback has some of the harshest work conditions and their lace-up boot by Honeywell weather them with the workers.
DESIGN & MATERIALS
Oliver 65 Series 65394 is made of SPR leather upper and an AT rubber outsole. The sole is made of thermoplastic polyurethane (TPU) SAFETY cell reinforced sole. The upper is fitted with a NATURE form steel toe cap that is spacious and protects against impact and compression. The boot is built like a fortress around your foot due to the XRD Metatarsal Guard. There is puncture protection in the sole called the Qflex Zero-puncture protection. There is the AT Dual-Density Soling Technology and AT rubber outsole that adds to the non-puncture protection. The sole also offers better grip and traction on any surface. The boot’s construction is reinforced with Kevlar stitching.
Oliver 65 Series 65394 is designed for the oil and gas industry and the people who work with machines. This boot has lace in zipper closure for a secure and snug fit. These are waterproof boots with a heat-resistant sole. These boots are ready to work in wet working conditions. The SPR leather and steel, the metatarsal guard and TPU sole will keep you safe and sure-footed. There is a safety cell reinforcement from heel to toe that protects against abrasions and cuts.
Oliver 65 Series 65394 has SPR leather is tough and durable and offers protection from caustic chemicals such as sulfuric acid, calcium hydroxide, potash, etc. The thermoplastic polyurethane sole is light yet offers excellent protection from minerals and oils. It is splitting, abrasion and slip-resistant, too. The NATUREform steel toe has a wide profile that gives sufficient space and protects from stub or crush injuries. In addition to the safety toe, there is an XRD Metatarsal Guard. It protects the foot from rolling or falling objects. Q-flex Zero-puncture protection is a non-metallic insert that protects the foot from punctures. The AT Dual-Density Soling Technology and rubber sole make the boots anti-static, non-marking and elastic. The boots are reinforced with Kevlar stitching for additional durability.
Oliver 65 Series 65394 is supported by a 6-month warranty.
- SPR leather
- TPU sole
- Steel toe
- Metatarsal Guard
- Zero puncture protection
Caterpillar work boots are tough, reliable, durable and comfortable. They are ideal for working and walking. The Threshold boots have steel toes and are waterproof. They are also resistant to electrical hazards.
DESIGN & MATERIALS
Caterpillar Threshold upper is made of leather and textile. It is fused to the T3 outsole using the Goodyear Welt construction. The outsole offers a good grip on all types of surfaces – smooth or rough. There is a nylon mesh inside to wick moisture and help in ventilation. There is a removable PU sock liner. It offers a springy cushion that comforts the foot while keeping it warm. The steel shank protects, stabilizes and supports the foot. The steel toe meets and exceeds ASTM standards against compression and impact.
Caterpillar Threshold is comfortable, stable and durable. They offer protection in harsh conditions such as dirt, mud, dust, snow, water and hard-packed earth. The high-quality leather plus other high technologies make these boots a daily choice – on and off work. The comfort features of the Thresholds are the Climasphere breathable insoles that keep your soles comfortable. The moisture-wicking lining keeps the foot dry and cool. Goodyear welt construction offers flexibility and durability. The oil-tanned full-grain leather brings you durable protection. The rubber outsole is slip-resistant and offers maximum traction. You can find a comfortable pair among wide and medium width toes in US size 6 – 14.
Caterpillar Threshold offers ASTM protection against impact and compression. This makes these boots suitable for work in workshops, heavy industries, oil rigs, farms, warehouses, etc. They meet and exceed the ASTM standard for protection from electrical hazards. This makes them suitable to wear around open circuitry. They work on farms and in other wet conditions due to the slip-resistant sole.
Caterpillar Threshold is supported by a one-year warranty.
- Exceeds ASTM standard for toe compression
- Exceeds ASTM standard for electrical hazard
TBL is a world-renowned footwear company that makes boots for men and women. These are chic and rugged outdoor footwear. Timberland brings you excellent products that make rustic chic an in thing.
DESIGN & MATERIALS
Timberland White Ledge TB012135214 has a 100% leather upper and a rubber sole. The shaft is 4.75 inches high from the arch of the foot. The boot is waterproof due to the treated leather, seam-sealed construction, and a rustproof speed lace system with hooks. These are hardy boots perfect for tough and challenging environments such as a mechanics workshop. Every detail of this boot is geared towards a superior function. These boots are good value for money due to all the functionality rolled into them. They are waterproof, offer aggressive traction yet cushion the foot.
Timberland White Ledge TB012135214 are trial-ready boots for hiking, camping, work, and casual wear. They are made from a combination of textile and leather. They have a rubber sole for excellent traction on any surface. There is a lace-up vamp that ties the boot snugly to your foot. The boots can be pulled on using the pull-up loop in the rear. There is a padded collar to support the ankle. There is a removable EVA insert for extra comfort. These boots come in size US 7 – 15 to accommodate feet of 25 to 33 cm. They are also available in two widths – narrow to extra wide. The wide forefoot and sole that offers greater stability.
Timberland White Ledge TB012135214 has recycled rubber in the sole. The upper is made of premium quality waterproof leather. Your foot will be dry due to the TimberDry, eco-conscious, waterproof Membrane. There is a removable dual-density anti-fatigue insert for cushioning. The boot has a compression-molded EVA foam midsole to enhance support and comfort. This mid-high boot has a gusseted tongue for added support.
Timberland White Ledge TB012135214 is supported by a 12-month warranty.
- Anti-fatigue footbed
- Mid-rise boot
- TimberDry membrane
- Ankle padding
Skechers for Work is a line by this American brand. The company makes lifestyle products and footwear. It was founded in 1992. This is an award-winning brand that develops, designs and markets this footwear that appeals to a wide range of people.
Design and Build
Skechers for Work Workshire Condor is made of full-grained leather upper. And fitted with a Nitrile rubber outsole for traction due to the lugs. It is oil-resistant, too. The upper has a lace-up system with eyelets that fit the boot snuggly around the ankle offering a cushioned comfort. The boot has stitched seams for reinforcement. There are accents to enhance the durability of the boot. The upper has leather overlays on the side and heel. The padded collar and tongue for comfort. The moisture-wicking lining keeps your foot dry. The relaxed fit design makes the boot roomier for better ventilation. The removable insole absorbs shocks while walking and offers comfort.
Skechers for Work Workshire Condor is waterproof and protects against electric hazards. The boots have a full-grained, waterproof leather upper. There are a lace-up system and a toe and ankle protection. The boot looks smart due to the neat stitching and overlaid accents. The rubber outsole is an oil-, slip- and abrasion-resistant. There is a pull-on tab above the heel. A soft fabric boot lining absorbs moisture keeping your foot dry. The removable insole is washable. This helps odor-control and maintain the hygiene of the boot. The boots have a foam insole. The boots are available in two widths – medium and wide and US size 7 – 16.
Skechers for Work Workshire Condor is perfect for work indoors or the great outdoors. You will be comfortable in your auto shop, on a farm, at a construction site, or medium and heavy industries.
Skechers for Work Workshire Condor carries a one-year warranty.
- Reinforced seams
- Heel & side overlays
- Electrical Hazard (EH) safe
- Superior traction
These boots come from the Hypard Trading Corporation. Its mission is to provide its customers with high-quality footwear They hope to bring optimum value for customer satisfaction. The company was established in 1981. They sell all types of footwear such as hunting boots, hikers’ boots, uniform boots, loggers’ boots, work boots, etc.
DESIGN & MATERIALS
AdTec 9843 has a leather upper with a rubber sole. The boot has a 6-inch shaft and 0.5-inch heel. These stylish work boots are great looking but wear well too. They also have all the safety features you could ask for. The outsole is oil, acid, slip-resistant. The boot has a wide base that helps you keep your footing. They have a soft toe and an orthotic PU insole that can be removed for cleaning and replacement.
AdTec 9843 can be pulled on or pushed off with ease due to the side zipper. There is a pull-on loop on top of the heel. These boots are available in various sizes and widths to accommodate all types of shapes, sizes, and widths of feet. You get excellent quality for your money with the high-quality materials and construction. You will find these boots in wide and medium options in US size 7 – 14.
AdTec 9843 has a leather upper and a rubber outsole that is stitched together using the Goodyear welt construction. The zippers are made of high-quality steel. The deep lugs are abrasion resistant and will last a long time. The high quality upper and tough welt are long-lasting. The boot will last you a long time due to the replaceable outsole.
AdTec 9843 is supported by a 60-day warranty.
- Side zipper
- Crazy horse leather
- PU insole for comfort
- Slip, oil & acid resistant outsole
Magnum was founded by Frank Van Wezel in 1974. The man loved sports and was looking for comfortable sports shoes. This led to innovation into lightweight technology. Since the brand has consistently brought various technologies to their customers to enhance the comfort and functionality of the boots.
DESIGN & MATERIALS
Magnum Men’s Response III 6.0 is made of durable tough leather inlaid with breathable mesh panels. The boot has a lace-up panel fitted with rustproof hardware. The moisture-wicking lining is for comfort and odor control. There is a steel shank that offers support and comfort. There is a contoured sole that can be removed. It offers comfort, shock absorption and cushioning. Also, there is an EVA midsole that adds to the comfort. The durable rubber outsole is for grip and traction.
Magnum Men’s Response III 6.0 is solid, durable yet comfortable. These versatile boots will serve a carpenter, mechanic, truck driver, policeman or security personnel. These durable boots will last you for a long time. If you have bought them from a store you can take them back for repairs. You may be a firefighter or a mechanic who works indoors and outdoors these boots will be there with you in all types of weather – cold, hot, wet or dry. You may have to stand and move about all day. These boots with their cushioning and energy-returning features will keep you fatigue-free.
Magnum Men’s Response III 6.0 is made of leather and nylon. The upper is used to the rubber sole using the sole-seal technology. This not only binds the shoe making it waterproof. It also makes them durable prolonging their life. The long-wearing aggressive lugs offer firm traction and light-footedness. The boot has a composite shank and contoured insole that is removable.
Magnum Men’s Response III 6.0 is supported by a 12-month warranty.
- Tactical boots
- Rubber sole
- Contoured sole
- Composite shank
- Slip-resistant outsole