How to Dry Wet Work Boots? 101 Guide

How to Dry Wet Work BootsWork boots are designed to protect your feet from the elements and safety hazards that may be present in your workplace. However, there are times when the working conditions result in the boots becoming soaked through, especially when you need in such conditions for extended periods. In such cases, it is necessary to dry out the boots properly to prevent them from being damaged extensively in the process. Ensuring that the boots are thoroughly dried after being exposed to a great deal of moisture will also guarantee that you will not need to go through the discomfort of wearing damp footwear, which can lead to the formation of painful blisters and may even result in the growth of odor-causing bacteria inside the boots. Before discussing the ways to dry wet work boots, it is important to note that exposure to direct heat such as hair dryers or heaters should be avoided because these heat sources can damage the leather material.

Ways to Dry Wet Work Boots

Clean and prepare the boots for drying

Before proceeding with drying the boots, make sure that they are first cleaned. Wipe off dirt or mud that have settled onto the surface so the boots will not be dried along with these unwanted substances on the material. Check the soles and make sure to remove pebbles and other debris that may be stuck in these areas. Remove the wet laces as well before you start with the procedures that you will use to dry out the wet work boots, as the laces will need to be dried out separately. Also, remove the insoles and dry them out separately – leather insoles should be dried under the sun while foam insoles can be placed inside the dryer.How to Dry Wet Work Boots

Use a fan for drying

Using an electric floor or stable fan is one of the quickest and most effective ways to dry your wet work boots. It would be best to use a fan that is large and sturdy enough to accommodate the size and weight of the pair of boots so the footwear can dry simultaneously. Stabilize the fan by placing a towel underneath so it remains steady throughout the drying process. The towel will do double-duty by catching and absorbing the excess water that may drip from the boots as they are left to dry for several hours. Use a strong wire and form it into an S-shaped hook, with one curved end that needs to be big enough to support the boot through its tongue flap. The other curved end of the hook, on the other hand, will need to be just the right size to fit into the fan’s wire frame. Keep the boots positioned with the interior facing towards the blades of the fan. Turn on the fan and leave the boots hanging in front of the fan overnight or for as long as it takes for the boots to be thoroughly dried.

Use newspapers

The use of newspapers for drying boots is ideal for more fragile footwear that has a higher risk of being damaged when subjected to the other drying methods for wet work boots. You can expect this procedure to take a longer time compared to the other options but using newspapers will expose the boots to less stress, so it is an ideal choice for footwear made with delicate materials. After ensuring that the boots are free from dirt, make sure that the insoles are removed first so they can be dried separately. Fill the interior of the boots with newspapers, making sure that the insides are filled out enough so that the shape of the boots are properly maintained while they are being dried. Use more newspaper to wrap the outside portion of the boots. The newspapers will work to How to Dry Wet Work Bootsabsorb the moisture inside and outside of the boots, so it is important to change the newspaper pieces every 2-3 hours until the footwear is completely dry.

Use the power of sunlight

This drying method work for work boots that are not made with leather, as the sun can cause the leather material to warp or crack. For non-leather work boots, the sunlight can be a natural way to dry out and remove the accumulated moisture both in and out of the footwear. Simply leave the pair of work boots in an area where they will be exposed to direct sunlight so the heat can work on evaporating the wetness. The sunlight can also work on stopping bacterial growth inside the boots to prevent strange odors from developing so you can enjoy fresh-smelling footwear for a longer time.

Use rice

The same method used to dry out phones that have been spilled on or soaked will do the same wonders for wet work boots. This procedure involves filling a plastic bin with rice so that it occupies about an inch of height in the container. The boots should be placed on top of the rice pile and it is best if the container can be sealed. The rice will work on absorbing the moisture from the boots, and the procedure can be finished overnight so you can look forward to completely dried out work boots the next day.

Use towels and a fan

Just like the newspaper method, this procedure of drying wet work boots is a suitable option for delicate footwear that is prone to being damaged when you use other drying methods. A dry towel’s ends are placed into the interior of the boot and the other portions will be uses to cover the rest of the footwear. With the boot entirely wrapped within the towel, it is a good idea to place the package in front of a fan to hasten the drying process. The towel will continue to absorb excess moisture from the boots so it will be best if you can replace the towel after every few hours so that the drying procedure can be complete, with your work boots completely dried after several hours.

Use a boot dryer

A boot dryer is a nifty investment especially if you own several pairs of boots or shoes that will benefit from this How to Dry Wet Work Bootsdrying option. It will be especially beneficial if your job requires you to work in wet surroundings, or if you regularly experience snow or sleet and you will need the quick-drying power of this device. A boot dryer comes with two pipes that will be inserted into the wet work boots, which will be dried out quickly as the device blows out hot air or heat into the footwear to help evaporate excess moisture. These dryers come in various styles and sizes to suit your requirements so you can look forward to dry boots without too much effort involved in the process.

Use shoe inserts

Shoe inserts such as cedar boot tree are useful drying out the interior of the boots after they have become exposed to excess moisture. The cedar wood shoe insert is placed inside boot where it will work its magic by absorbing the moisture over a short period of time so you can once again use the boots without having to endure a damp and uncomfortable feeling. Depending on the materials used, shoe inserts may also work to provide a pleasant scent into the interior of the boots to fight any lingering fouls smells that may have built up over time with the accumulation of moisture and bacteria.

FAQs

Q: Why is it important to keep work boots dry?

A: Work boots need to be kept dry so that fungi and bacteria that can cause bad odors and skin infections will not How to Dry Wet Work Bootsthrive in and out of the footwear. Keeping the boots dry after they are exposed to excess moisture will help keep your feet safe and comfortable in the long run.

Q: Can I dry my work boots under the sun?

A: This method will work nicely for work boots that are made with non-leather materials. Leather work boots should be kept out of the sun because the direct heat can cause serious damage to the leather material.

Q: Why is it necessary to remove the laces before drying the boots?

A: When you leave the laces on while the boots undergo your preferred drying method, discoloration may set in on the area directly below the laces. To avoid this unsightly issue, it is best to remove the laces before proceeding to the drying the work boots using the method of your choice.

Q: Should the boots be cleaned first before they are dried?

A: Yes, the boots should be cleaned first to remove dirt, mud, grime, and other debris that may have built up on the boots’ surfaces. This way, these substances will not leave permanent stains on the boots even as they are going through the drying process.

Conclusion

Wet work boots can cause extreme discomfort and may even increase the risks of infections when damp footwear is used for long stretches of time. It is important to follow the proper steps to keep the work boots dry once again to ensure that they will continue to provide a high level of comfort and functionality, especially in the workplace.

Scroll to Top