Good work boots make better employees. It is a government regulation to outfit employees in appropriate footwear that reduces injuries. Good industrial footwear means high quality steel toe work boots for men. These not only improve confidence and heightens morale, but it also improves productivity. It cuts out lost work hours as the workers are not down due to work-related injuries and health issues.
Section 29 CFR 1910.136 of Occupational Safety & Health Administration (OSHA) regulations expect the worker’s feet to be protected against piercing objects, rolling or falling objects and electrical hazards. The electrical hazard could be electric shock or a static-discharge.
They also recommend this protective footwear to be worn while working with corrosive poisonous materials, a molten metal that could splash on the feet and while working on hot and/or slippery surfaces. While setting up an industry OSHA recommends an assessment by a consultant. They are to determine the need for Personal Protective Equipment (PPE) and the footwear the employees should use.
The other organization that sets the standards is ASTM International. ASTM does not enforce these standards they are adopted by the industries that the manual covers. Though ASTM compliance is a part of any contract made by that industry.
Read our latest guide about the best insulated work boots for men.
Types of Steel Toe Work Boots for Men
There are steel toe work boots according to their shape and the material.
There are asymmetric and symmetrical steel toes fitted in a boot. The asymmetrical steel toe boots may be customized for the right and left foot. The cap is taller at the wider and taller at the hallux and tapering at the little toe. The symmetrical steel toes are caps fitted into the rounded toe of a boot.
There are steel, aluminum, composite and carbon nanofiber toe caps. Steel safety toes are an industry-standard since years. Steel toe work boots provide protection from heavy equipment and falling objects.
Read our complete guide about the best Danner boots.
The Best Steel Toe Work Boots for Men offer Seven Ps
The steel toe work boots are a lifesaver. They not only protect the employee from work-related injuries they protect the employers from litigations, fines, and penalties. The seven Ps offered by the steel toe boots are;
Protection from flying or falling objects –
The steel toe can withstand up to 75 pounds of pressure when the object falls from a distance of 3 yards. You never know when such an eventuality occurs and your steel toe has you covered.
Protection from cutting hazards and punctures –
Something sharp like an ax may fall on your foot or you may step on something sharp like a nail. The steel toe guards your foot against these accidents.
Protection from electrical hazards –
While working with exposed wires and high-power conduits you may be exposed to a build-up of static electricity or an electric shock. As there are no conducting parts these boots can withstand 18000 volts of electrical shock for up to a minute in dry conditions.
Prevention of falls, trips, and slips –
The soles of the boots are made of non-slip material such as rubber or polyurethane and have aggressive lugs. The materials offer traction while the lugs offer a grip. This prevents falling, tripping or slipping which are the most common job injuries. The material and design also prevent the buildup of mud and dirt between the lugs.
Prevention of fatigue –
As the upper and the sole work together to offer support and comfort they contribute to making a productive workday. Features such as PU midsoles etc., work as shock absorbers and return the energy to the foot. This would make you feel as though you are walking on air.
Protection from extreme weather –
The work boots are made of waterproof materials and lined with insulation to offer protection from wind, water, and sun.
Probably mandatory –
If you work from an industry that requires you to wear PPE as per OSHA and Labor department directives. You are most likely to the sent home if you do not wear Personal Protective Equipment. In other words, the best steel toe work boots are mandatory.
Key Features on the Best Steel Toe Work Boots
The features accredited by international standards are;
Toe Protection –
The steel toe was developed in the 1940s for the protection of the loggers and heavy industry worker’s feet. Steel toes have the advantage that they are lightweight yet compression, cut and puncture resistant. The steel toe is enclosed in leather or rubber to prevent the conduction of cold and electricity.
Waterproof and water-resistant –
Materials such as Gore-Tex, Denier, etc., are used to make a light yet waterproof footwear. These materials are moisture-wicking and prevent water into the boots. This keeps your feet dry all the time.
These boots will be insulated with Thermolite or Thinsulate. The insulation is put between the liner and leather. And the amount of insulation or the weight is indicated in grams. The higher the number; the more the insulation.
Electrical safety –
These boots prevent electrocution by preventing the completion of the circuit by grounding. The rubber, PU, insulation, and materials used in the liner and upper work as insulators. They meet the ASTM standards.
The outsole is made of materials such as rubber, Vibram or PU that offer slip-proof traction even when exposed to oil and/or water.
Oil resistant –
Boots may be exposed to petroleum products such as diesel, oil, kerosene, etc. These oil substances may cause deterioration of the shoe’s construction. Steel-toed boots are made to withstand such deterioration.
Do all steel toe work boots meet ASTM Standard F2413?
Yes. The best steel toe work boots for men should meet the performance requirements for the protective safety toe cap. These are metatarsal compression resistant and offer protection against electric shock and puncture. They prevent shock by conduction and dissipate static charges.
ASTM requirements are marked on the footwear. They are either stitched on or stamped on pressure-sensitive labels on the inside or outside of the boot. The mark may be on the tongue, quarter lining, shaft or the gusset of the shoe.
The mark has a four-line code bordered by a rectangle. Besides this, the toe cap needs to carry the manufacturer’s trademark, logo or name, and an identification number. The caps size should be marked clearly in a visible area. The four lines indicate the specific areas of compliance;
M 1/75 C/75
Line 1 – Shows the standard ASTM F2413 designation while the number 11 is the year this standard was put in place.
Line 2 – The M denotes the boot is for a male while F denotes it is for a female. The 1/75 indicates it is impact resistant and C/75 indicates it is compression resistant. The number 75 correlates to 2500 pounds of compression.
The Metatarsal designation (Mt) is designated to this line with a number 75. Metatarsals are the long bones between the ankle joint and toes of the foot. The designation indicates that the footwear is designed to withstand a compressive load or pressure of 75 foot-pounds.
Line 3 and 4 – There are two more lines – lines 3 and 4. This example shows line 3 only. Here the EH and PR denote the additional features for protection. ‘EH’ stands for Electrical Hazards and build-up of static electricity while ‘PR’ stands for punctures.
What do the various color symbols on the boots mean?
Some safety boots have symbols on the outside. These symbols indicate the protection that boot offers. Here is a list of their meaning;
Green Triangle denotes that it is a class 1 toe cap with the puncture-resistant sole. These boots are suitable for heavy industries such as construction sites. The shoes can withstand an impact of 125 joules.
Yellow Triangle specifies that it is a class 2 toe cap with the puncture-resistant sole. These boots are suitable for light industries and can withstand an impact of 90 joules.
White Square with orange omega (Ω) indicates electrical protection. The boot is suitable for industries with accidental exposure to live electrical conductivity.
Yellow Square with SD in green letters indicates anti-static protection. The soles dissipate the electrostatic charge in a controlled manner. The boots are suitable for industries that work with materials and systems that generate static electricity such as photocopier machines, painting, pollution control, etc.
Red Square with letter C in black and a grounding symbol indicates electrically conductive. These boots are meant for industries where a low electrical charge may present a hazard. Thus, the soles are electrically conductive.
Fir Tree on a white background indicates protection against chain-saws. These boots are meant for forestry personnel who use chainsaws and similar cutting equipment.
A blue rectangle with letters R in a white circle and C cradling letters SA in it offers class 1 protection up to 125 joules. These boots are meant for personnel who do not require sole puncture protection.
Grey background with the letter R in a black circle offers Class 2 toe protection of up to 90 joules. These boots are meant for non-industrial workers who do not require sole puncture protection.
What are the various types of footwear with steel toes?
A huge selection of safety footwear such as shoes, sneakers, loafers, riggers, wingtip, rangers, clogs and ankle boots is available to suit your needs.
Top 15 Best Steel Toe Work Boots for Men 2021
|1. Keen Utility BRADDOCK 1012771
||Oil- and slip-resistant outsoles||$$$||4.5|
|2. Carhartt CMW8200
|3. WOLVERINE Overpass W10717
||Shaft measures approximately 5″ from arch||$$$||4.4|
|4. Timberland PRO 8-Inch Rigmaster XT
||Lug rubber outsole||$$$||4.4|
|5. Ariat Groundbreaker WST H2O ST-M
|6. Red Wing Irish Setter Men’s 83606
|7. Wolverine Raider Steel Toe 6-inch Work Boots
Moisture managing mesh linings
|8. Caterpillar Second Shift Steel Toe Work Boots
||Hex-shape grommets with speed lacing at shaft||$$||4.3|
|9. KEEN Utility Pittsburgh Steel Toe Work Boots
||Shaft measures approximately mid-calf from arch||$$||4.2|
|10. Timberland PRO 6-inch Pit Boss
||Heel measures approximately 1.25″||$$$||4.1|
|11. AdTec 9-Inch Steel Toe Super Logger Boots
Heel measures approximately 1.75″
|12. KEEN Utility Detroit 8-Inch Steel Toe Work Boots
||Left and right asymmetrical steel toes||$$||4.1|
|13. Wolverine Rancher 10-Inch Steel Toe Work Boots
||Platform measures approximately 0.75 inches||$$$||3.9|
|14. Skechers for Work Workshire Steel Toe Boots
|15. Dickies Raider Steel-Toe Work Boot
||Oil and slip-resistant rubber outsole||$$||3.9|
This boot takes comfort into overtime. These boots come from a progressive company that makes work boots, premium footwear, socks, and bags. They are an outdoors company that design and manufacture goods to keep you in style yet protect you.
Keen Utility BRADDOCK 1012771 is a rugged waterproof boot that allows the moisture from the sweat out but not in. The boot is built for comfort with a roomy toe box. The boot has a long-wear cushion that keeps your foot dry and comfortable. The cushion is to absorb shocks when you jump off high places or land your foot on uneven surfaces. The soles are slip- and oil-resistant that keep your stride confident and firm.
Design and Build
Keen Utility BRADDOCK 1012771 is built with the best materials collected from around the world and integrated with a polyurethane heel cushion. The boot has a KeenDry membrane that is waterproof and breathable. The boot has a left and right asymmetrical toe for protection. These work boots meet and exceed the non-slip ASTM F1677-96 Mark II standards. They also guard you against electrical hazards by exceeding the ASTM F2412-11 and the F2413-11 I/75 C/75 EH standards. These mid-high shoes protect the ankles by working in tandem with the TPU stability shank.
Keen Utility BRADDOCK 1012771 is a medium-duty boot with a steel toe. The boot has an upper made of waterproof nubuck leather. The rubber sole is slip and oil resistant with a direct-attach polyurethane midsole. The direct attach prevents the water from seeping in keeping the insides dry. The boot has a hydrophobic-hydrophilic 2-zone lining that brings moisture-wicking comfort. The boot has a removable metatomical dual-density EVA footbed that conforms to the foot This customizes the boot to the owner.
Keen Utility BRADDOCK 1012771 comes in two widths – medium and wide. The boot is available in US size 7 – 15.
Keen Utility BRADDOCK 1012771 is supported by a one-year warranty.
- KeenDry membrane
- KeepGrip oil- & slip-resistant outsoles
- KeenProtect Toe protection
- Left & right asymmetrical safety toe
- Metatomical footbed design
This is a work boot for men with an 8-inch shaft and a steel toe. Carhartt has been making men’s work boots for the last 125 years. The use the finest materials to construct high-quality boots to meet your satisfaction.
Carhartt CMW8200 will keep your feet comfortable and protected from hazards on a farm, factory or warehouse floor. The steel toe ensures that your toes are protected in case things roll or fall onto your feet. It could be a bale of hay or a falling canister of chemicals. The steel toe can withstand 2500 pounds of impact. Besides this, the boot has a reinforced heel that has an Achilles flex joint. This allows a natural range of motion and impact resistance. There is a waterproof membrane that is breathable and moisture-wicking keeping your feet dry in all weathers. The durable treads on the PU sole give traction in every stride. And it sheds mud keeping your show light and hygienic while you walk between home and farm or job site.
Design and Build
Carhartt CMW8200 is made of oil-tanned leather that is stitched into an upper with a lace closure. A direct welt construction polyurethane outsole is fitted to this upper. There is a cushioned PU insole that absorbs shock and returns energy to the foot. The tip of the boot has a steel toe fitted between the upper and the compressed composite of the insole and outsole. This fixes the steel toe in place to meet the compression hazards as specified by ASTM standards. The foot is held firmly in place between the upper, steel toe and quarters by a TPU heel guard that has an Achilles flex joint. All these components work together for ankle stability and impact protection from 360.
Carhartt CMW8200 are rugged steel toe boots that are impact resistant. They can be used in a factory or a farm. Wherever there is a chance of heavy things falling or rolling on to a person’s foot. The boot also offers protection against a chance contact with live wires and circuits carrying up to 18000 volts in dry conditions.
Carhartt CMW8200 is available in two widths – wide and medium. The boot is available in US size 8 – 15.
Carhartt CMW8200 is supported by a 1-year warranty.
- Exceeds ASTM 2413-17 electrical hazard standards
- Steel toe
- TPU heel guard
- PU insole
- Storm Defender moisture-wicking membrane
Wolverine World Wide, Inc. that was founded 135 years. They are an American footwear manufacturer based in Rockford, USA. The other well-known brands by the parent company are Merrell and Hush Puppies. The Overpass is a series by Wolverine with three models – Overpass 6-Inch, Wellington and insulated. This model is Overpass 6-inch.
WOLVERINE Overpass W10717 has a Carbonmax toe and a 6-inch shaft. The boot fuses the innovative technologies to bring you high performance and comfort. These high-performance boots cushion your feet from 360 and return energy to the foot reducing fatigue. The boot has safety toes that meet and exceed regulations standardized by ASTM. The sole of the boots is contoured to maximize motion this allows the boots to bend and flex along the foot. This facilitates the natural motion of the foot that maximizes the wearer’s performance and dexterity. There is a waterproof, breathable membrane that wicks away moisture to keep the foot dry.
Design and Build
WOLVERINE Overpass W10717 is made of waterproof premium quality leather. The boot has an abrasion-resistant toe. There is a moisture-wicking inner lining to keep wick away the moisture and keep the feet cool. There is a removable OrthoLite footbed that molds to the foot and cushions it. There is an advanced PU midsole with a dual compound PU and rubber outsole to grip the ground. The sole and upper are fused and fitted together using the Goodyear welt construction. There is a nylon shank that offers extra support and strength. The Carbonmax composite toe meets the ATSM F2413-18 M I/75 C/75 EH standards. The boot is a mid-rise that protects the ankle and the lace-up system allows you to tie up the boot snugly around the foot making it work as an extension of your foot.
WOLVERINE Overpass W10717 is an ideal work boot for a person working on a farm, barn, factory, warehouse or construction site. The boot is abrasion, oil, water, and chemical resistant. It provides added protection to the worker’s feet.
The WOLVERINE Overpass W10717 is available in two widths – wide and medium. The boot is available in US size 7 – 14.
WOLVERINE Overpass W10717 comes with a one-year warranty.
- Waterproof leather
- Carbonmax composite toe
- Removable OrthoLite footbed
- Dual compound outsole
- Moisture-wicking membrane
Timberland LLC is a part of VC Corporation founded by Nathan Swartz in New Hampshire, USA. This is an outdoor brand that makes sunglasses, watches, apparel, and footwear.
Timberland PRO 8-Inch Rigmaster XT has an 8-inch shaft and steel toes that hold your feet safe and snug in a comfortable grip that offers excellent traction on any surface. The boot has shock diffusion and anti-fatigue technology.
Design and Build
Timberland PRO 8-Inch Rigmaster XT is made of premium quality waterproof leather that has been treated with Ever-Guard abrasion-resistant coat. It has a durable waterproof membrane that wicks moisture and a steel safety toe that is built to last and offers a superior fit. The upper is bound to the sole by the Cast-Bond Goodyear Welt construction. This is a dual bond – chemical and mechanical that holds the boot together. The midsole has a conical anti-fatigue geometry made of polyurethane material. There is a finger grip loop that helps pull on the boot and a padded collar. There is an antimicrobial mesh lining that not only absorbs moisture but also kills the odor. There is a contoured footbed that conforms to the foot. It is a single density open-celled PU footbed. The mesh and the footbed work in tandem with each other to keep you dry, cool and odor-free. There is a steel shank to offer structural support. The single-density outsole is abrasion-, oil- and heat-resistant that features the Ladder Lock outsole radius.
Timberland PRO 8-Inch Rigmaster XT is ideal for workers in the oil and gas industry. The Ringmaster offers exceptional slip-resistance, anti-fatigue traction, and shock diffusion technologies.
Timberland PRO 8-Inch Ringmaster XT comes in two widths – medium to wide. The boot is available in US size 7 – 15.
Timberland PRO 8-Inch Ringmaster XT is supported by a 12-month warranty.
- Mid-cut work boot
- Steel toe
- Upper with waterproof leather & PRO rubber vamp
- Goodyear welt construction
Ariat International is an apparel and footwear company. They are an equestrian and outdoor activity brand. The company was founded in 1993 with headquarters in Union City, USA.
Ariat Groundbreaker WST H2O ST-M is protected by a steel toe and waterproof leather. The Platform offers multi-surface traction and comfort. The steel toe gives you confidence and protection for working around heavy objects and electrical hazards. The fur layered footbed, insole, and outsole are cushioned and offer support. There is a moisture-wicking inner lining to keep you dry and comfortable all day long. The full-grained leather upper has 4-rows of stitching to reinforce the tough leather. The sole is slip-, oil- and wear-resistant. It has a Duratread grip and a 90-degree heel that should keep you steady on a wet or dry surface.
Design and Build
Ariat Groundbreaker WST H2O ST-M is a pull-on style cowboy boot that delivers style and comfort. This is a dependable work boot with a Groundbreaker platform and a typical wide square toe fitted with a steel cap. The 4LR will cushion and lend support to your foot daily. The heavy-duty Duratread outsole offers oil-, slip-, wear-resistance. The insole returns energy to the foot and has a higher rebound. This upper is made of 900 Denier nylon and full-grained leather with Waterproof Pro construction. There is an inner mesh lining that wicks moisture.
Ariat Groundbreaker WST H2O ST-M has a steel safety toe that meets the ASTM standards for electrical hazards. The wide toe with steel cap protection makes these ideal work boots for farmhands, industrial and warehouse workers. You can also wear them around sources of all types of electricity – flowing and static.
Ariat Groundbreaker WST H2O ST-M or Wide Square H2O Steel Toe is available in two widths – medium and wide. The boot is available in Men’s US size 7 – 13.
Ariat Groundbreaker WST H2O ST-M is supported by a one-year warranty.
- Rubber sole
- Wide square toe mesh lining
- 4LRTM footbed for comfort
- Oil and slip-resistant outsole
Red Wing Boots are an American company that makes footwear for outdoors and work. The Irish Setter is a hunting and work boot line by Red Wing. The distinctive design has a rich russet color and the logo of an Irish Settler – a hunting dog – on the boot.
Red Wing Irish Setter Men’s 83606 or the Ashby are made of full-grain leather that is fused and stitched to the EVA outsole. These boots offer heat resistant protection that is ideal for pavers, roofers, workers in boil rooms and other high heat work conditions. In such conditions, your feet heat up and sweat. Thus the boot is well-ventilated and lined with a moisture-wicking lining. These boots have an aluminum toe that meets and exceeds ASTM standards for toe protection. They also meet and exceed ASTM standards for electrical hazards.
Design and Build
The Red Wing Irish Setter Men’s 83606 or Ashby 83606 has an upper made of waterproof leather and an EVA platform sole. The Trout Brook leather is prepared using time tested methods. The durable leather has withstood the demands of the toughest job site and trail. The Heat Resistant Outsole (HRO) sole is meant for high heat surfaces. It will not melt or soften up till 475F.
Red Wing Irish Setter Men’s 83606 has an aluminum toe that makes this a work cum hunting boot. You can wear it while logging in the wilderness the falling logs and branches will not be any risk. The traction offered by the platform boots will keep you on track firmly and stealthily. You will be comfortable on the factory floor or the farm and a pheasant field or turkey blind. These boots will be a part of you on the trail, in the camp, range or woods. These lifestyle boots will keep you comfortable everywhere.
Red Wing Irish Setter Men’s 83606 comes in two widths – medium and wide. The boots come on US size 7 – 14.
Red Wing Irish Setter Men’s 83606 are supported by a one year warranty.
- Aluminum Toe
- Goodyear Welt Construction
- Full Grain, Waterproof leather
- Removable Polyurethane footbed
Wolverine is a well-known brand of boots that has been around for 135 years. They have survived, thrived and forged ahead to provide workers – men and women – with high-quality boots.
Wolverine Raider Steel Toe 6-inch Work Boots have a waterproof upper made of full-grain leather. There is an inner lining of mesh to wick moisture and sweat. The upper is fused with the MultiShox sole. The boot has an advanced polyurethane midsole that absorbs shock and returns the energy to the foot. There is a deep lug near the arch of the foot on the outsole. It gives a better hold on ladders and surfaces such as corrugated sheets, gangplanks, etc. The 360° hold on the foot made snug by the laces with brass fittings and nylon laces give you confidence. The Goodyear welt construction and the MultiShox outsole and insole combined with the PU midsole will bring a spring in your step keeping fatigue at bay.
Design and Build
Wolverine Raider Steel Toe 6-inch Work Boots is a mid-high shoe that protects the ankles from twisting and trauma. The padded collar and tongue support the ankle and protect the upper part of the foot. There is a steel cap embedded in the toe covered by a waterproof leather upper with a lace-up system. The foot is held firmly in place due to the heel counter. The upper is fused to the layers of a PU midsole and an outsole with lugs reinforced by the Goodyear Welt construction. There is a removable insole that conforms to the wearer’s foot to customizing it.
Wolverine Raider Steel Toe 6-inch Work Boots has a steel toe and layers of PU in the sole. There are multidirectional lugs and treads on the sole to give an excellent grip on wet and dry surfaces. These boots meet the ASTM standards of foot protection thus can be worn for work with electronics and heavy industries.
Wolverine Raider Steel Toe 6-inch Work Boots comes in two widths – medium and wide. The boot is available in US size 7 – 15.
Wolverine Raider Steel Toe 6-inch Work Boots is supported by a 1-year warranty.
- Versatile work boots
- MultiShox insole and outsole
- Deep lugs in the outsole
- Advanced midsole
Caterpillar boots are reliable, durable and comfortable. They are ideal for daily wear, working and walking. The Second Shift boots have steel toes embedded in them, they are waterproof and resistant to electrical hazards.
Caterpillar Second Shift Steel Toe Work Boots are comfortable and durable. They offer protection in harsh conditions such as dirt, dust, water and hard-packed earth. The high-quality leather and other technologies make these boots a daily choice – on and off work. The comfort features of these boots are the Climasphere breathable insoles that keep your soles comfortable. Goodyear welt construction offers flexibility and durability. The oil-tanned full-grain leather brings you durable protection. The T3 rubber outsole is slip-resistant and offers maximum traction.
Design and Build
Caterpillar Second Shift Steel Toe Work Boots upper is made of nubuck leather. It is fused and stitched to the T3 outsole using the Goodyear Welt construction. The outsole offers grip on smooth surfaces that offer low or no traction. There is a nylon mesh on the inside to wick moisture and help ventilation. The removable PU sock liner is springy it cushions and comforts the foot keeping it warm. The steel shank stabilizes, supports and protects the foot. The steel toe offers ASTM standard protection against compression and impact.
Caterpillar Second Shift Steel Toe Work Boots offer ASTM F2413-11 I/75 C/75 protection against toe compression and impact. This makes it suitable for work in heavy industries, farms, warehouses, etc. They meet and exceed ASTM F2413-05 standard 1/75 standard against electrical hazard making them suitable to wear around all sources of electricity – active and static. They can be work on farms and other wet conditions due to the slip-resistant sole.
Caterpillar Second Shift Steel Toe Work Boots come in two widths – wide and medium. They are available in US size 6 – 14 for men.
Caterpillar Second Shift Steel Toe Work Boots are supported by a one-year warranty.
- Exceeds ASTM F2413-11 I/75 C/75 standard for toe compression
- Exceeds ASTM F2413-05 standard 1/75 standard for electrical hazard
KEEN Utility Work Boots come from a progressive company that is advancing its designs daily. They combine the latest materials, orthotic technology, ASTM and OSHA standards when designing their boots.
KEEN Utility Pittsburgh Steel Toe Work Boots feel like a cross between well-padded hiking boots and tennis shoes. They have a waterproof, breathable lining to keep your foot ventilated and dry. The EVA midsole and footbed offer support and comfort. Due to this shock-absorbing quality, you can wear them all day. The traction and shock-absorbing features keep you comfortable on hard concrete floors, roofs, gangplanks. They also offer traction while climbing stairs and ladders.
Design and Build
KEEN Utility Pittsburgh Steel Toe Work Boots have a 90 heel. They carry the Keen Key Tech which is a full-length interlocking torsion plate made of TPU. The Keen Dry is a breathable, waterproof membrane. The boots have asymmetrical toes in the right and left foot. The lace-up system consists of lacing eyelets and metal hooks. There is reflective webbing on the boot that highlights you in dim light. These medium-duty nubuck leather boots are oil and slip-resistant. They have a non-marking outsole. There is a shock-absorbing PU and EVA midsole.
KEEN Utility Pittsburgh Steel Toe Work Boots are suitable for work on construction sites, in heavy industries, warehouses, etc. They are built for protection, performance, and comfort. These boots have safety features and cushioning at the right places.
KEEN Utility Pittsburgh Steel Toe Work Boots come in two widths – medium and wide. The boots are available in US size 7 – 15.
KEEN Utility Pittsburgh Steel Toe Work Boots are supported by a 1-year warranty.
- Two-zone Hydrophobic-hydrophilic comfort lining
- Removable metatomical footbed
- Asymmetrical steel toe
- Hiking inspired snug fit
Timberland has always set industry standards through their craftsmanship and durability. The construction and materials of their boots offer reliable waterproof protection.
Timberland PRO 6-inch Pit Boss is a steel toe boot that offers every protection expected of work boots. They have a roomy toe box that meets the ASTM standards this means no pinched toes and better balance. The boots offer unsurpassed traction on all kinds of wet or slippery surfaces. They also offer protection against electronic hazards such as open circuits and static electricity. They are very comfortable with a removable sock liner. It protects against blister and chafes.
Design and Build
Timberland PRO 6-inch Pit Boss has an upper made of nubuck leather for waterproof durability and comfort. The boot has a Goodyear welt construction where the upper fuses with the outsole. There is a steel toe embedded in the toe box and the padded collar offers support and comfort. This mid-high boot has a PU midsole and is lined by Cambrelle fabric lining. This anti-microbially treated fabric offers odor control. The lace-up system has metal top hooks that help tie on the shoe snuggly. There is a shock-absorbing nylon plate that offers torsional rigidity and support. There is an open-celled PU footbed that is removable. Due to the antimicrobial treatment, it helps in odor control.
Timberland PRO 6-inch Pit Boss has a steel toe, they offer protection against electrical hazards. The upper is made of waterproof leather and the outsole is oil-, abrasion-, slip-resistant to offer traction. This makes it suitable for all kinds of job sites and industries where you need protection from falling objects, electrical hazards and injury due to slippage.
Timberland PRO 6-inch Pit Boss comes in two sizes – medium and wide. They are available in US size 7 – 15.
Timberland PRO 6-inch Pit Boss is supported by a one-year warranty.
- Nubuck leather
- Goodyear welt construction
- Steel toe protection
- Odor killing moisture-wicking lining
- Nylon shock diffusion plate
AdTec of the Western Company has been bringing you technologically advanced footwear since 1981. This Denver-based company makes reliable and stylish footwear. Each piece undergoes stringent quality control tests for zero defects.
AdTec 9-Inch Steel Toe Super Loggers are all-purpose boots for comfortable long wear. The boots have a cushioned insole and an oil-resistant outsole. You can pick a wide or medium width toe box. You can walk confidently due to the oil-resistant lug sole that offers traction.
Design and Build
AdTec 9-Inch Steel Toe Super Logger Boots are made of saddle leather that has been stitched onto a leather sole using the Goodyear Welt construction. There is a rubber sole with heavy lugs adhered to the leather outsole for grip and traction. The upper has a lace-up system with metal eyelets and studs. There is a leather tongue that rises to the shin. The 9-inch shaft protects the foot and the shin from heat, impact, and abrasions. There is a steel toe embedded in the toe box. It works in tandem with the heel counter to hold the foot snug and comfortable.
AdTec 9-Inch Steel Toe Super Logger Boots will protect your feet from harsh working conditions such as outdoor job sites, construction sites, landscaping, farming, hiking, etc.
AdTec 9-Inch Steel Toe Super Logger Boots are available in two widths – medium and wide. The boot is available in US size 6.5 – 14.
AdTec 9-Inch Steel Toe Super Logger Boots is supported by a one-year warranty.
- 75-inch platform
- Rubber sole with lugs
- Saddle leather
- Goodyear welt construction
These utility boots by Keen feature the KEEN.DRY breathable, waterproof membrane that is supportive and flexible. The boot has a silhouette of a hiking boot with reflective features for your safety. The boots not only look good they also feel smart.
KEEN Utility Detroit 8-Inch Steel Toe Work Boots has a versatile design that protects and supports the foot during those long working hours. The nubuck leather upper is waterproof and fitted with the KEEN.PROTECT, the patented steel toe for protection. The outsole rises upwards and wraps around the upper for a bumper like added protection. The boot is lined by the KEEN.DRY membrane which is waterproof and breathable. It wicks moisture and keeps your feet dry. The Dri-Lex is a 2-zone hydrophobic-hydrophilic footwear lining. The boot has a dual-density metatomical EVA footbed that is removable. This footbed has an internal support mechanism engineered to provide arch support while cradling the foot. The ESS shank offers torsion stability. The outsole is oil- and slip-resistant. It exceeds the ASTM F1677-96 MARK II non-slip testing standards and the ASTM F2412-11 and F2413-11 I/75 C/75 EH standards.
Design and Build
KEEN Utility Detroit 8-Inch Steel Toe Work Boots have left and right asymmetrical toes in their toe box. Its weight is balanced by the contoured heel lock. There is a KEEN.DRY membrane that is waterproof and breathable. The KEEN.KEY-TECH FLEX technology offers contoured support to the underfoot this provides comfort and structural stability. The boot has reflective webbing that glows in dim light to make you visible for additional safety. There is a Cleansport NXT lining for odor control.
KEEN Utility Detroit 8-Inch Steel Toe Work Boots have a waterproof upper and a metatomically constructed insole, midsole, and outsole. The outsole has lugs for traction. These features make these boots stable and dependable. The sole is designed using such materials and design that you will feel fresh and energetic even at the end of a long working day. The boot’s construction makes them ideal for working outdoors and indoors. You will be able to climb, get off, walk or run on any surface with confidence. They can take harsh conditions like construction sites, oil rigs, and factory floors.
KEEN Utility Detroit 8-Inch Steel Toe Work Boots is available in two widths – regular and wide. The boot is available in US size 7 – 17.
KEEN Utility Detroit 8-Inch Steel Toe Work Boots is supported by a one-year warranty.
- Exceeds ASTM F1677-96 MARK-II non-slip testing standards
- Exceeds ASTM F2913 SATRA non-slip testing standards
- Exceeds ASTM F2412-11 & F2413-11 M I/75 C/75 EH standards
- Natural odor control
You will find the right boots with the right toes for your job. All Wolverine safety toe work boots meet ASTM standards that protect your feet from hazards at the worksite.
Wolverine Rancher 10-Inch Square Toe Steel Toe boots are cowboy wellingtons. The boots can be pulled on and take off with ease. They have the classic features of a western boot such as the 90° heels, the long and notched shaft. They are made of leather and compression-molded outsole. The lightweight cement construction holds the boot together. The cushioned footbed is for comfort. The steel shank protects from abrasions and trauma.
Design and Build
Wolverine Rancher 10-Inch Square Toe Steel Toe Boots are a cowboy wellington made of genuine leather. It has a synthetic sole and a shaft that measures 11.5 inches from the arch of the foot. The heel is 1.75 inches and the platform is 0.75 inches. The opening of the boot measures 14 inches around. The upper and the sole are stitched using the Goodyear welt construction for strength and durability. The steel toe meets and exceeds the ASTM standards. There are slip-resistant lugs on the outsole to protect you on slippery surfaces. There is a removable Ortholite footbed for prolonged comfort.
Wolverine Rancher 10-Inch Square Toe Steel Toe boots are made of waterproof leather. This means your feet will remain dry and comfortable in wet and dry conditions. The boots meet and exceed ASTM standards for toe safety and electrical hazards. They are also slip-resistant outsole. These features make them ideal for most indoor and outdoor working conditions. These may be farms, factory floors, construction sites, etc.
Wolverine Rancher 10-Inch Square Toe Steel Toe boots are available in two widths – medium and wide. The boots are available in US size 7 – 14.
Wolverine Rancher 10-Inch Square Toe Steel Toe boots carry a one-year warranty.
- Synthetic sole
- Waterproof leather
- Meets & exceeds ASTM standards for toe safety
- Meets & exceeds ASTM standards for electrical hazards
- Slip-resistant outsole
Skechers is an American brand of lifestyle and footwear products founded in 1992. They are an award-winning global leader who design, develop, and market footwear that appeals to the trend-savvy people.
Skechers for Work Workshire Steel Toe Boots are not only waterproof they also protect against electrical hazards. The boots have a full-grained smooth finish waterproof leather upper. The upper has a lace-up system with a built-in steel toe and ankle protection. The boot feels and looks smart due to the stitching and overlay accents. There is an oil-, slip- and abrasion-resistant outsole. The boots have a memory foam insole.
Design and Build
Skechers for Work Workshire Steel Toe Boot is made of full-grained leather upper and a Nitrile rubber outsole that offers oil-resistant traction due to the lugs. The upper has a lace-up system with eyelets that closes up around the ankle for cushioned comfort. The boot has reinforced stitched seams and accents to enhance the durability of the boot construction. There are leather overlays on the side and heel panels. There are a padded collar and tongue and soft fabric, moisture-wicking lining. The boot has a relaxed fit design making it roomier for ventilation. There is a removable insole for comfort and a shock-absorbing midsole for support.
Skechers for Work Workshire Steel Toe Boot is ideal for work indoors and outdoors. You will be comfortable on a farm, construction site, medium and heavy industries, etc.
Skechers for Work Workshire Steel Toe Boot is available in two widths – medium and wide. They are available in US size 7 – 16.
Skechers for Work Workshire Steel Toe Boots carries a one-year warranty.
- Steel toe for safety
- Toe tested for ASTM F2413-2011 I/75 C/75 protection
- The design is Electrical Hazard (EH) safe
- Sole designed of superior traction
Dickies have been making boots for hardworking feet since 1922. They are made for maximum durability, comfort, and protection. You select your boot from waterproof and steel toe work boots with excellent sole constructions.
Dickies Raider 6-Inch Work Boot-M has a nubuck or full grained leather upper. The tough upper is stitched onto the polyurethane sole using the Goodyear welt construction. The outsole is oil-, slip-, abrasion-resistant. Whether you are out tailgating, on a construction site, walking on concrete or at a job site – you will be stable, secure and comfortable on your feet.
Design and Build
Dickies Raider 6-Inch Work Boot-M has a hiking boot silhouette. The upper is made of 100% leather fitted onto a synthetic rubber sole. The shaft is 9 inches from the arch. The circumference of the boot is 14.25 inches. This work boot is fitted with speed-lacing hardware. It has a quilted collar and polyurethane insole. The outsole is slip and oil-resistant.
Dickies Raider 6-Inch Work Boot-M is ideal for wet and dry surfaces. The boots fit around your foot snugly becoming an extension of the foot. They offer traction and grip on any surface – concrete or an uneven trail. They are ideal for outdoor and indoor working conditions. You can wear them around the factory floor or on a construction site.
Dickies Raider 6-Inch Work Boots are available in two widths – medium and wide. They are available in US size 7 – 14.
Dickies Raider 6-Inch Work Boot-M is supported by a one-year warranty.
- Premium Leather Upper
- Moisture Wicking lining
- Removable Insole
- Rubber Outsole
- Injected Welt Technology