Top 15 Best Chemical Resistant Work Boots in 2020 – Ultimate Guide

They are required to off-set the hazards of working with chemicals. Not all chemicals are toxic or dangerous butTop 15 Best Chemical Resistant Work Boots in 2020 many are! So, it is prudent to take care of our safety while using, handling, combining and storing them.

They pose a danger to the workers’ health as they cause injuries, illnesses, and fatal accidents. The other risks are skin injuries, asthma, allergies, infections, chemical burns, birth defects, reproductive problems, asphyxiation, various types of cancer and death.

The hazardous chemicals may be in 4 forms – solid, liquid, vapor/gas or dust. Their physical form affects how the chemical enters the body. This also determines how much damage it inflicts.

The workers must be protected from leaks, spills, inhalation of hazardous chemicals and materials. This it is essential to use safety equipment thus chemical resistant work boots are a crucial part of Personnel Protection Equipment (PPE).

Read our latest guide about the best puncture resistant work boots.

Requirements and Standards for Chemical Resistant Work Boots

These boots are suitable protection while working with chemicals. They are having steel toes, are waterproof and abrasion-resistant. Any hazardous chemicals cannot penetrate these work boots.Top 15 Best Chemical Resistant Work Boots in 2020

There are safety agencies from around the world who do these tests. To name a few – European Committee for Standardization (CEN), American Society for Testing and Materials (ASTM), Canadian Standards Association (CSA), OSHA, etc.

These boots pass through a three-part test

In part 1, they are tested for all the terminologies used by applying those chemicals to the boots.

In part 2, they are tested for requirements for footwear under laboratory conditions. The test is centered around degradation. This is because the footwear forms a barrier between the worker and the chemicals. Only after the degradation of the material will it come in contact with the person. How quickly and in what manner is insulation fails – the certification is granted after that. If the expected results are met for two or more chemicals then the material is passed.

In part 3, the footwear is tested under lab conditions for degradation and permeation time. The certification is granted only after degradation and permeation are measured for three or more chemicals.

The Degradation test measures the physical deterioration of the boot’s material. The lab studies – what happens when the material comes in contact with the chemicals? Usually, the material becomes hard, brittle, stiff, weaker or swells. In the worst case, the material may dissolve.

The Permeation test measures the time taken by the substance to penetrate through the material of the boot. This is known as permeation time and has 5 performance levels.

  • Class 1 – 121 – 240 minutes
  • Class 2 – 241 – 480 minutes
  • Class 3 – 481 – 1440 minutes
  • Class 4 – 1441 – 1920 minutes
  • Class 5 – more than 1921 minutesTop 15 Best Chemical Resistant Work Boots in 2020

For example – if your boot is marked Class 1 then the chemicals will take 121 to 240 minutes to soak through the material of the boot and touch your skin.

These boots are placed in contact with any 3 of these 15 chemicals for 23 hours. Just to give you an idea about how much your boots can tolerate. Here is a list of what these boots were subjected to – Ketones, hydrocarbons, ethers, alkalis, acids, peroxide, alcohol, Hypochlorite, etc.

Your boots will protect you from Acetone (Ketone), Dichloromethane (Chlorinated hydrocarbon), and Toluene (Aromatic hydrocarbon). They will protect you from Diethylamine, Tetrahydrofuran Heterocyclic Ether and Ethyl acetate which is an ester.

They will protect you from n-heptane (saturated hydrocarbon), sodium hydroxide solution (30 % d = 1.33) and sulfuric acid (95% d = 1.84). These boots will also withstand Nitric acid (65 ± 3%), Acetic acid (99 ± 1%), Ammonia solution (25 ± 1%) and Hydrogen peroxide (30 ± 1%).

Some chemicals have a drying or desiccating effect on the boots such as Isopropanol (Aliphatic alcohol) and Sodium hypochlorite (13 ± 1%).

Read our complete guide about the best work boots for mechanics.

How are good chemical resistant work boots identified?

Industries use a wide range of chemicals of which a number of them are hazardous. The safety agencies named above offer standards that have enlisted 15 chemicals. These chemicals are the most commonly used in any sector.

These standard protections are mentioned on the boots; for example – EN-ISO 20345 are safety boots thatTop 15 Best Chemical Resistant Work Boots in 2020 offer chemical protection. The ones marked with EN 13832-3:2006 standard is chemical-resistant footwear.

Most boots meet the chemical-resistant work boots standards but some are awarded multiple certifications. These boots indicate the certified chemicals they can withstand. These chemicals may only be added to the list after the boot has passed the above-mentioned tests.

This does not mean that these chemicals cannot be used with other chemicals. This means that an employer working with the enlisted chemicals can safely get or recommend these boots for the safety of their workers. Besides these certified and enlisted chemicals, there are many other chemicals for which the data is available.

In other words, the laboratory data for degradation and permeation is available for chemicals enlisted too. This means that even if you come in contact with 15 chemicals enlisted These boots will still offer protection.

These results are shared to help you ensure that you have 100% protection from the specific chemicals. This is called full risk assessment and helps handle medical, safety and insurance cases.

The Advantages Of Chemical Resistant Work Boots

A good pair of work boots should protect your feet from chemicals while allowing them to breathe. They protect your feet from wetness, slippage, chemical burns and contamination from chemicals.

These boots will protect your feet from;

  • Washing chemicals – If you work will chemicals on the floor. Such as disinfectants while washing the Top 15 Best Chemical Resistant Work Boots in 2020abattoir floor, or washing the hospital floor, while painting or washing rugs and carpets. If you work in a barnyard with potash, acids, alkalis and other corrosive chemicals. Then boots made of rubber with safety toes and polymeric rain boots are recommended to prevent chemical burns. They may be made of specially treated leather too.
  • Construction of batteries – is where you come in contact with acids. These aggressive acids are highly corrosive on the boots. You may slip and suffer a fall on a floor with a cocktail of chemicals. Here rubber sole boots or polymeric rain boots will withstand the spray and splash.
  • Handling nuclear waste – are radiation and a chemical burn hazard. A metal-free composite boot that is puncture-resistant (PR) should keep you safe.
  • Biomedical waste – can carry harmful pathogens, needles, and other health hazards. A puncture-resistant, high boot, rain boots or polymeric boots should keep you safe.

Features on chemical resistant work boots

When buying your boots revise the conditions you work in and the level of protection you require. Then consider the following;

Selection – Chemical resistant work boots come as shoes, boots, sneakers, riggers, loafers, rangers, wellingtons, ankle boots, high boots, wingtips, clogs, etc. If you are going to be working in an environment with a lot of splashing and sloshing then high boots, knee-high boots or calf-high boots are recommended.

Chemical resistant – The boots should have passed the above-mentioned safety tests. They should have the marks as prescribed by the safety agencies.

Safety toe & METATARSAL PROTECTION – such as plastic, composite, alloy, aluminum, carbon fiber, etc. are very useful. They protect your toes from a falling object such as drums full of fluids etc. They are cut, compression Top 15 Best Chemical Resistant Work Boots in 2020and puncture-resistant. As these toes are enclosed in rubber or leather they insulate from electricity and chill. The non-metal toes contribute to the EH protection.

Waterproof/water-resistant – Materials such as leather, Denier, Gore-Tex, etc., make these boos light and waterproof. These materials wick moisture but do not let the water in keeping your feet dry and happy.

Comply with safety standards – Various countries recommend safety standards – the boots should meet the standards. To name a few – International & European Safety Footwear Certification (EN ISO 20345), Australian & New Zealand Safety Footwear Standard (AS/NZS 2210.3), and American Safety Footwear Certification (ASTM F2413 and ASTM F2413-11) and CSA compliant (CSA Z195-14).

Insulated – If you are working in a cold yet toxic environment these boots will carry Thermolite or Thinsulate insulation. The insulation is put between the outer and inner layers of the boot. The amount of insulation is indicated in grams. The boot with 800 gm of insulation will be warmer than 200 gm of insulation.

Electrical safety – These boots prevent electrocution by grounding the circuit. These are made of PU, rubber, carbon fiber, nylon, etc. The materials used in the liner and upper work as insulators.

Slip-resistant – The outsole is made of materials such as rubber, Nitrile, Vibram or Polyurethane that offer traction on a greasy and/or water.

Oil resistant – Boots may be exposed to petroleum products such as Vaseline, diesel, grease, oil, kerosene, etc. These substances may cause deterioration of the shoe’s material and construction.Top 15 Best Chemical Resistant Work Boots in 2020

Heat-resistant – Some boots may have Nitrile soles that can stand heat up to 300°C. They are reinforced with Kevlar aramid threads that are 5 times stronger than steel.

FAQs

Are chemical resistant work boots flameproof?

These boots may of flame-retardant materials such as asbestos, phosphate-based compounds, nitrile rubber, etc. Kevlar double stitching also improves heat and abrasion tolerance.

Who should use chemical resistant work boots?

Professionals working in industrial environments such as chemical works, corrosives, abrasives, etc. People handling garbage, refuse, barnyard chemicals, fertilizers, pesticides, etc. People working with nuclear, biomedical and biohazardous materials should use these boots. As they are puncture-resistant, biohazard-proof and waterproof. They also have oil, abrasion, slip-resistant soles.

Do chemical resistant work boots have sealed seams?

These boots are completely sealed between the upper and sole to prevent any water, dissolved chemicals or chemical spills from seeping into the boots. Yet they carry all the comfort features such as comfortable, durable and supporting midsole and footbed. The foot is gripped comfortably in a chemical-resistant synthetic or leather upper.

Why do chemical resistant work boots have kick-off lugs?

Kick-off lugs are a small part in the back of the boot that helps slid the foot in and out of the boot without touching it. This is a great facility while working with chemicals. This prevents touch the dried splashes on the boot which may cause skin irritation or accidental ingestion too.

Top 15 Best Chemical Resistant Work Boots in 2020

Picture Name Feature Price Rating
Picture Name Feature Price Rating
1. Oliver 65 Series 65396
 

All-Terrain Dual Density Soling Technology

 

$$$ 4.5
2. WOLVERINE MEN’S OVERPASS 6-INCHES
Shaft measures approximately 5″ from arch $$$ 4.5
3. Carhartt CME6355
 

Waterproof and breathable

 

$$$ 4.4
4. Honeywell Servus 22214-CTM-090
 

Waterproof and highly resistant to acids

 

$$$ 4.4
5. Carhartt CMF6366
Durable & Versatile $$$ 4.4
6. Wolverine Overpass 10- inch Composite Toe Waterproof-M
Removable Ortholite cushioned footbed $$$ 4.4
7. Muck Boots Chore
 

Heel measures approximately 1″

 

$$ 4.3
8. Timberland PRO Men’s 53522 Powerwelt Wellington Boot,Rancher Brown,10 M
Pull-on construction

$$$ 4.3
9. Servus Comfort Technology PVC Work boots
Heel measures approximately 1″ $$ 4.2
10. Carhartt CMF6380
Synthetic sole $$$ 4.1
11. Servus MAX 75120

Triple Density Technology (TDT)

$$ 4.1
12. Servus XTP 75109
Dual-compound center sole $$ 4.1
13. Tingley 27251.13 FLITE
3.60 pounds $$ 3.9
14. Servus SuperFit 11095
SuperFit oversized design $$ 3.9
15. UltraSource Goliath 440050-14
Cleated outsole $$ 3.9

1. Oliver 65 Series 65396

The 65 Series by Oliver is a line of safety footwear specifically designed for oil and gas workers. The boots can be Oliver 65 Series 65396used for liquid, chemical and barnyard works too. The upper is made of SPR leather and hardwearing TPU. The thermoplastic urethane SAFETY cell reinforcement ensures protection from minerals, oils, abrasions, and cuts.

Design & Features

Oliver 65 Series 65396 is a pull-on boot with a 10-inch shaft made of chemical resistant leather. The boot is fitted with a puncture-resistant steel toe and metatarsal guard. The boot carries the All-Terrain Dual-Density Soling Technology. This Soling Technology combines the soft, shock-absorbing low-density rubber in the midsole and high-density, abrasion-resistant rubber for the outsole. The outsole not only offers traction on surfaces littered with oil, grease, fat, alkalis and acids. It is also heat-resistant up to 572 °F or 300 °C. The boots meet the Meets ASTM F2413-11 M I/75 C/75 Mt/75 PR EH for electrical hazard. The boot carries the Qflex Zero non-metallic puncture and impact protection. The boot also brings you technological innovations like the XRD metatarsal guard. There is a wide profile protective toe called the NATUREform.

Safety & Functionality

Oliver 65 Series 65396 are chemical resistant while being durable and comfortable. These boots are recommended for construction, chemical industries, farming and equestrian purposes, manufacturing, heavy metals, mining, oil, and natural gas operations. The boot brings you safety and comfort. It has the Nanolite footbed that has a gently raised surface. It massages your foot while walking reducing fatigue due to better blood flow. The perforated foam allows ventilation to reduce odor. The NATUREform safety toe has a wide profile to allow an easy flex to the foot. The toe box is padded with a latex cushion liner that keeps the toes comfortable. There is an XRD metatarsal guard that is flexible and light. On impact, the molecules of the guard offer protective shielding that absorbs 90% of the impact force. The All-Terrain soling technology is made of two materials – one absorbs shock while the other supports and is abrasion-resistant.

Sizes

Oliver 65 Series 65396 is available in the US sizes 6-15 for men.

ADDITIONAL FEATURES

Oliver 65 Series 65396 carries a 6-month warranty.

Highlights

  • 10-inch shank
  • SPR leather upper
  • TPU SAFETY sole
  • NATUREform steel toe
  • EH-protection
  • Kevlar thread stitching

2. WOLVERINE MEN’S OVERPASS 6-INCHES

These work boots by Wolverine are chemical resistant, durable and comfortable These premium quality boots are WOLVERINE MEN’S OVERPASS 6-INCHESavailable for both the sexes. Available in two colors – black and brown. These boots will work well with all types of work apparel.

DESIGN & MATERIALS

The Wolverine Overpass 6-inch boot features the Contour Welt technology. This makes the sole comfortable and liquid proof. If you work with chemicals and water on the floor, they will not seep in to touch your skin. The lugged outsole is made rubber that is lightweight and abrasion-resistant. The upper is made of superior quality waterproof leather fitted with a tough abrasion-resistant toe. The manufacturer has made these boots to meet the ASTM standards for EH protection. The boot is lined with moisture-wicking mesh to keep the feet cool and dry. The removable Ortholite footbed molds to your foot while the PU sole offers advanced well-ventilated comfort. There is a dual-compound outsole made of soft PU and dense rubber that offers shock absorption and traction. There is a nylon shank that gives better support and strength to the boot.

SAFETY & FUNCTIONALITY

The Wolverine Overpass has a 6-inch shaft and the Contour Welt technology in the sole. It brings you waterproof safety, flexibility, and comfort. The boot will keep you well protected in any environment. The upper and outsole are fused to offer waterproof safety. The moisture-wicking lining keeps your feet dry and odorless. The boot is built of materials that make it light while absorbing shock when you move on uneven ground. The aggressive lugs hold on to the floor so you will not slip in the oil slick or spill. The dual-compound technology, the orthosole the moisture-wicking lining and tough leather uppers are a total of innovative technology developed by Wolverine. The Carbon Max toe meets the ASTM standards for EH, impact, and compression. The carbon fiber toe is stronger than steel but very light. The boot is ergonomically designed for better balance and ergonomics as the sole, outsole and footbed contour to the foot. These Motion Max technologies cause the boot to bend and flex at the focal points of your gait.

SIZES

The Wolverine Overpass 6-inch boots are available in US size 7 – 14. You can find a comfortable fit in wide and medium options, too.

ADDITIONAL FEATURES

Wolverine Overpass (6-inch) boots are supported by a one-year warranty.

HIGHLIGHTS

  • OrthoLite footbed
  • Carbon Max toe box
  • Motion Max technology
  • ASTM certified

3. Carhartt CME6355

These industrial boots for men are waterproof. They belong to the Energy series with a composite toe. These peanut Carhartt CME6355oil-tanned boots are soft and supple. The contoured sole will protect you from anything on the floor of your industry or job site.

DESIGN & MATERIALS

Carhartt CME6355 is made of oil-tanned leather fused with a rubber sole. These are ankle-high boots. The boot is fitted with an advanced footbed that offers unmatched comfort. Carhartt took 120000 3D scans of feet to bring you an unmatched ergonomic fitting. This fitting would offer unmatched comfort, form, and fit. The advanced footbed has an Ax suede top cover that offers 30% more grip preventing fatigue and slippage. There are two layers of different density foams. These have compression and rebound properties that prevent fatigue on prolonged use. It is a breathable yet waterproof boot that keeps your feet dry – no matter the circumstances. The boot is lined with a waterproof membrane that wicks moisture. The sole and the lining promote air circulation that keeps your feet cool and dry. Yet the lace-up system has eyelets on the vamp and pegs on the shaft to tighten the shoe around the feet on cold days. The boot meets and exceeds the ASTM standards for electric protection.

SAFETY & FUNCTIONALITY

Carhartt CME6355 is an industrial boot that will protect you from accidental contact with 18000 volts in dry conditions. The AX Suede cover on the sole reduces slippage and offers better traction. It lies over the Pulsion energy rebound PU foam that returns energy to the foot. The tetrapod design reduces fatigue by dispersing compression. The compression in various directions eliminates the pressure hot spots. The Ground Force outsole offers traction, grip, flexibility on chemical, oil, or wet surfaces.

SIZES

Carhartt CME6355 is available in US size 8 – 15 in wide and medium options. The boot weighs 1.8 pounds.

ADDITIONAL FEATURES

Carhartt CME6355 is supported by a one-year warranty.

HIGHLIGHTS

  • AX suede top cover
  • Pulsion energy-rebound foam
  • Tetrapod anti-fatigue technology
  • Storm defender

4. Honeywell Servus 22214-CTM-090

Servus are PVC and dipped-neoprene boots that offer unprecedented protection from oils, acids, and chemical Honeywell Servus 22214-CTM-090hazards. They are meant to work in the toughest job sites and environments.

DESIGN & MATERIALS

Honeywell Servus 22214-CTM-090 features a 15-inch shaft. These wellington boots are triple dipped neoprene and 100% waterproof. The boot is lined with fabric and has a Breathe-O-prene insole. The boot is made of hand-laid rubber and fitted with a steel toe. It has a Chevron outsole and as it is rubber it meets and exceeds ASTM standards for electrical hazard. If you work at a construction site, an oil refinery, or road construction. These are ideal boots for you. They offer impact protection on muddy and wet workplaces. The boots are triple dipped in neoprene to make them completely seamless. This makes them 100% waterproof and resistant to chemicals, contaminants, and acids. These boots are crafted for all-day comfort They have removable washable insoles. The lining is breathable and keeps your feet dry and well ventilated. The Chevron outsole squeegees the liquid and dirt form the sole preventing build-up and slippage.

SAFETY & FUNCTIONALITY

Honeywell Servus 22214-CTM-090 are triple dipped wellingtons are seamless. This makes them 100% waterproof. They are resistant to chemicals, acids, contaminants, and toxins. The hand-laid rubber base is strong and flexible. The Breathe-O-Prene insole is removable and washable. It absorbs shock and is moisture-wicking. It has a soft fabric lining that keeps the feet dry. The self-cleaning Chevron outsole has a flat tread that offers a surface to surface contact. This offers a good grip and traction to make the boots slip-resistant. There are open channels that squeeze out the debris and liquid while you walk. The steel toe offers protection against impact and electrical hazards such as shock or static buildup. The boots are recommended for barnyard workers, construction workers, food processing industry, farming, animal husbandry, equestrian and general-purpose use.

SIZES

Honeywell Servus 22214-CTM-090 is a 15-inch-high wellington boot. These boots are available in US size 3 to 15. They are available in 6-inch, 12-inch, 15-inch shaft heights.

ADDITIONAL FEATURES

Honeywell Servus 22214-CTM-090 is supported by a 1-year warranty.

HIGHLIGHTS

  • 100% waterproof
  • Breathe-O-prene insole
  • Chemical resistant
  • Durable construction
  • Chevron self-cleaning sole

5. Carhartt CMF6366

Whether you need protection from extreme weather or working conditions. Carhartt is here to offer rugged boots Carhartt CMF6366with safety toes to serve you in all conditions.

DESIGN & FEATURES

Carhartt CMF6366 is constructed from full-grained leather that is water-resistant. The upper extends up to the ankle to offer support and protection. The Plus string boot laces are waterproof and sturdy. The lacing system has eyelets, loops, and pegs. The laces run through the eyelets, the D-ring on the padded tongue and collar. This offers better traction to the lace and the pegs help hold the boot close to the foot. In frigid weather, the laces can be tied up till the ankles to keep your warm snug and dry. The boot meat the ASTM standards for EH. The oil-tanned leather and rubber sole are cemented to each other. The outsole is slip-, oil- and chemical resistant. The boot has an EVA midsole and an OrthoLite insole that cushions your foot all day.

SAFETY & FUNCTIONALITY

Carhartt CMF6366 comes with the Rugged Flex technology that stretches and moves with your foot all day long. This facilitates your work and there is nothing to hold you back from your work. The boot has a shock-absorbing rubber sole that also offers traction. The boots are perfect for indoor and outdoor work. You will be comfortable while strolling, hiking or working at a muddy job site on a cold day. Your feet will feet stable and well-supported. The Cemented construction of the Rugged flex outsole is waterproof and durable. You can go seamlessly between the industrial floor, woods to the workshop floor. This supportive boot is comfortable and tough. The boot has a padded collar and tongue. The boot is inlaid with an EVA midsole and OrthoLite insole that offer multiple layers of comfort and cushioning all day long. The boot is made of full-grained, waterproof leather The Plus string tie boots are sturdy and strong. The boots have ASTM certification for EH protection as it is made of leather and rubber fused with Cement construction. The sole is also slip-, oil- and chemical resistant.

SIZES

Carhartt CMF6366 is available in brown and oil tanned brown leather. The boots are available in US size 8 to 15 in wide and medium options.

ADDITIONAL FEATURES

Carhartt CMF6366 is supported by a 1-year warranty.

HIGHLIGHTS

  • Rugged flex outsole
  • Oil-tanned leather
  • Chemical resistant
  • Slip-resistant

6. Wolverine Overpass 10- inch Composite Toe Waterproof-M

The Overpass is a fusion of innovative technologies by Wolverine. The combination brings your performance and Wolverine Overpass 10- inch Composite Toe Waterproof-Mcomfort. These technologies are the Carbon Max toe-cap. The Motion Max technologies that allow natural flexion. The boot features a breathable waterproof membrane that keeps your feet dry.

DESIGN & FEATURES

Wolverine Overpass 10- inch Composite Toe Waterproof-M is made of 100% leather fitted with a rubber sole. The shaft of these wellington boots is 10-inches high from the arch to the top. The sole is flexible and athletic as it bends and flexes. The upper and the outsole are fused using the Contour Welt construction. The premium quality leather is abrasion resistant and waterproof. The boot has a removable OrthoLite footbed that brings you all-day comfort. The outsole is abrasion resistant, oil-resistant and slip-resistant. The composite toe is resistant to electrical hazards.

SAFETY & FUNCTIONALITY

Wolverine Overpass 10- inch Composite Toe Waterproof-M are chemical resistant boots. This is due to the leather the extended rubber toe, the CarbonMax toe, and the PU outsole. These features seal out the water so well that you can be sure that no chemicals will soak through the boots. They are abrasion-resistant too. The Overpass is made from a lightweight rubber outsole with lugs. The boots not only absorb shocks but also protect from abrasions, slips, and skids. The premium leather is lined with a moisture-wicking lining that keeps your feet dry and comfortable. The OthoLite footbed is made of foam that will conform to your foot. There is an advanced PU midsole supported by the dual-compound outsole. There is a PU layer that absorbs shock and offers traction. And there is a rubber layer that is tough and offers a better grip on the substratum. These wellingtons have a supportive nylon shank that protects your legs from splashes. The boot is ASTM certified for electrical hazards. It has a composite toe that protects from abrasions and electric shock.

SIZES

Wolverine Overpass 10- inch Composite Toe Waterproof-M are dark coffee brown boots with a CarbonMax toe. They are available in US size 7 – 14 in wide and medium options.

ADDITIONAL FEATURES

Wolverine Overpass 10- inch Composite Toe Waterproof-M

HIGHLIGHTS

  • Abrasion-resistant toe
  • CarbonMax toe
  • Moisture-wicking lining
  • Removable cushion footbed
  • PU midsole

7. Muck Boots Chore

These work boots by Honeywell offer their proprietary RDR chemical technology. These rubbers are treated to Muck Boots Chorewithstand abrasion-, oil-, chemical- and water-based degradation of materials. These boots are slip-resistant. The treatment has improved their performance by 20%. The V-wave outsole offers better traction on slippery ground.

DESIGN & FEATURES

Muck Boots Chore is loaded with features that will offer protection from chemicals. The boot is made of rubber and has a Vibram sole. The shaft of the boot is 15 inches from the arch to the top. The heel measures 0.75 inches and the platform is 0.5 inches. The V-wave oil sole offers excellent traction on any surface such as ceramic tiles, steel gangplank, etc. The V-wave has another significance – the dirt and water are squeezed off the boot as you walk. This way there is no buildup of mud and debris on the shoe. The shank is made of 5mm neoprene that is comfortable and flexible besides being waterproof. It also has heat-retentive and shock-absorbing properties. The boot will adjust to your foot shape without chaffing, blistering or hurting your foot. The steel shank supports the boot lessening wearer load. The boot has triple toes and a reinforced quadruple heel made of rubber. This offers durability and protection. The boot has an air mesh lining that wicks moisture. It keeps you dry bringing you long-wearing comfort. The boots can tolerate subzero to 18C of temperature.

SAFETY & FUNCTIONALITY

Muck Boots Chore is made of rubber and has a Vibram sole. These wellington boots are made of RDR compound which is slip-resistant. The entire boot is sealed to make it waterproof. The sole is oil, abrasion, chemical, and slip-resistant. It offers traction on all types of surfaces – steel, ceramic, brick, etc. The 5mm neoprene is flexible and comfortable. It can be bend over outwards for easy drying. The boot has a loop on the top of the shaft. It assists you to pull on the boot without touching the outer. The boot is lined with a breathable air mesh. It absorbs sweat and keeps you cool and comfortable. There is a steel shank that supports the foot. The boot is reinforced with four layers of rubber and triple toe. It has a non-safety soft toe to protect from stubs and scrapes.

SIZES

Muck Boots Chore has a 15-inch shaft, a 0.75-inch heel, and a 0.5-inch platform. The boots are available in US size 5 to 16.

ADDITIONAL FEATURES

Muck Boots Chore is supported by a 1-year warranty.

HIGHLIGHTS

  • Vibram sole
  • V-Wave outsole
  • RDR compound body
  • 5mm neoprene
  • Steel shank

8. Timberland PRO Powerwelt PWRWLTWELNTN

These work boots by timberland will help you get every detail right at your job. They are made to keep you Timberland PRO Men’s 53522 Powerwelt Wellington Boot,Rancher Brown,10 Mcomfortable so that you can focus on your job. They will also protect you from hazardous conditions and chemicals. The Ever-Guard leather is 10 times stronger and heat resistant. It also has a steel toe. These are authentic work boots made of waterproof leather since 1973. They responsibly source the material. They use recycled material in their boots and packaging too.

DESIGN & FEATURES

Timberland PRO Powerwelt PWRWLTWELNTN is wellington boots that are made of full-grained leather. They are abrasion-resistant, water-resistant and chemical-resistant due to the Ever-Guard treatment. The boot has the anti-microbial Cambrelle lining that is moisture-wicking. There is a finger grip to pull on the boots. It will not catch in your trouser legs. There is a heel guide that will help glide your foot into the boot with the ease and take them off easily. The insole is anatomically contoured and has integral shank support. The boot has an open-celled contoured footbed. It is made of polyurethane and has anti-microbial properties. The boot has a resilient cushion footbed that molds and cradles the heel. The Outlast adaptive comfort footbed is for thermoregulation inside the boot. The open-celled footbed breathes keeping your feet odorless and dry. The Lightweight Ladder Lock PU outsole is slip-, oil-, and abrasion-resistant. The torsional stability is enhanced by the Goodyear Welt- Cast-Bond; which is a chemical bond. The boot meets and exceeds the ASTM F2413-05 standards for impact, compression, and electrical hazards.

SAFETY & FUNCTIONALITY

Timberland PRO Powerwelt PWRWLTWELNTN has a metallic asymmetrical toe. It meets the Canada and US standards for safety against compression. There is a waterproof membrane that is waterproof and resistant to bloodborne pathogens. It meets and exceeds ASTM F2412-11, ASTM F2413-11, ASTM F2892-11 and ASTM F1671-07 standards for safety. This is seam-sealed footwear that has a breathable membrane inside to keep you dry and safe. The leather is passed through a special tanning process that makes the leather waterproof. The Timberland Pro 24/7 comfort system reduces fatigue and supports the arch. The PU sole is lightweight, it cushions and it is abrasion, slip and oil resistant. The abrasion resistance is notched up by the Ever-Guard leather specially made for job sites. The antimicrobial odor control is to absorb sweat and kills odoriferous bacteria.

SIZES

Timberland PRO Powerwelt PWRWLTWELNTN has a circumference of 15 inches, the shaft of 10 inches. The boot is available in US size 7 – 15 in wide and medium options. These are Rancher-Brown Oiled Full-grain Leather boots. They are available in Brown and Rancher brown.

ADDITIONAL FEATURES

Timberland PRO Powerwelt PWRWLTWELNTN has a 12-month warranty.

HIGHLIGHTS

  • Ladder Lock outsole
  • An antimicrobial mesh lining
  • Contoured open-cell PU footbed
  • Nonmarking sole

9. Servus Comfort Technology PVC Work boots

These work boots are available in steel toe and plain toe. These boots are 18821C with CTTM and steel toe. These Servus Comfort Technology PVC Work bootsboots are specially designed to work in hazardous conditions where you have to wade through cleaning chemicals, wetness, animal refuse, etc.

DESIGN & FEATURES

Servus Comfort Technology PVC Workboots are wellington boots that has been injection molded. The shaft height is 16 inches. The boots are not insulated, steel midsole or a metatarsal guard. The insole is inlaid with foot form contour cushion. The boot has a Trac 10 pattern of tread that prevents the debris from sticking to the sole. The entire boot is seamless, made of PVC, and waterproof. Comfort Technology brings you a scalloped top. This allows for easy movement and flexing. There is a guide along the shaft that allows customizing the height. The boot is reinforced at the stress points. The FootForm contour insole cushions the foot at the arch and the heel. It is replaceable, removable, and washable. The cleated outsole prevents falls and slips. The contoured heel cup gives a firm grip in the shoe. This transfers to a firm footing in the boot. The steel toe boot is ASTM compliant for impact and electrical hazard.

SAFETY & FUNCTIONALITY

Servus Comfort Technology PVC Work boots are recommended for food processing, farming, agriculture, animal waste, biomedical waste, fertilizers, etc. These injection molded boots are one piece that is seamless and waterproof. The Comfort technology offers a soft scalloped top that allows you to move easily without the shaft hindering the movement. It also gives you a hold to pull on the boots. The Trac10 outsole prevents falls and slips. The heel cup molding holds the foot in place. There is a removable insole that molds to the foot. The notch at the heel on the outside of the boot helps pull off the boots using the other foot as the lever. The boots are suitable for construction, municipal services, pharmaceuticals, steel and metals, oil and gas, utilities, forestry, etc. It protects from hazards such as impact – due to the steel toe. It also protects from splashes and contamination. These boots satisfy the CAN/CSA Z195-09, ASTM F2413-11, and ANSI Z41-1991 – OSHA 1910.136 standards.

SIZES

Servus Comfort Technology PVC Workboots have an 11.5-inch shaft from arch to top. The heels are 1 inch and the boot opening are 15.75 inches. This is a black steel toe boot that is available in US size 3 to 15.

ADDITIONAL FEATURES

Servus Comfort Technology PVC Work boots are supported by a 1-year warranty.

HIGHLIGHTS

  • Seamless
  • PVC injection molded
  • 100% waterproof
  • Scalloped top like
  • Trac10 outsole

10. Carhartt CMF6380

These work boots are called Rugged Flex. They have a 6-inch shaft and are waterproof. The boots bring you Carhartt CMF6380Carhartt’s commitment to quality, performance, and craftsmanship.

DESIGN & FEATURES

Carhartt CMF6380 is a leather work boot that keeps you on the move. You can go up-down, over and under with this boot confidently and comfortably. The boot has a lace-up system that makes the boot a part of your foot. There are eyelets, D-loops, and pegs to which the laces can be attached. This helps you either tighten up the boot till the ankles snuggly to keep the cold out. Or the boots can be left looser for better ventilation on warmer days. The boot is 6 inches from the arch of the foot to the top. The boot is built to help you move and keep your feet dry. There is a flexible outsole made of rubber. It gives you traction on all types of floor and grip on the rungs of a ladder. The boot has resilient cushioning for all-day comfort. There are composite reinforcements at the heel and the toe. It offers impact and abrasion resistance.

SAFETY & FUNCTIONALITY

Carhartt CMF6380 has an oil-tanned leather upper that is waterproof. There is a Storm Defender membrane that is breathable and waterproof. It keeps your feet breathing, dry and odor-free. The boot has a composite toe and heel. These offer safety, stability and meet the ASTM 2413-18 standards. The rubber toe and heel bumper are for protection and stability. The EVA midsole has a PU insole that absorbs shock and offers support. The Rugged Flex outsole is made of rubber. It offers flexibility and traction. These are industrial and construction boots that can withstand oil, alkalis, acids, cleaning agents, etc.

SIZES

Carhartt CMF6380 in dark brown oil-tanned leather is available in US size 8 to 14. It is available in medium and wide options to accommodate the bridge of your foot.

ADDITIONAL FEATURES

Carhartt CMF6380 is supported by a yearlong warranty.

HIGHLIGHTS

  • Oil-tanned leather
  • Storm Defender waterproof membrane
  • Rubber toe
  • EVA midsole

11. Servus MAX 75120

These men’s hi boots belong to the Northerner Series. These boots by Honeywell are injection molded PVC boots. Servus MAX 75120They offer protection in a wide range of environments as they are constructed from the finest materials that ensure comfort, protection, and durability.

DESIGN & FEATURES

Servus MAX 75120 are synthetic boots made from injection-molded PVC. It is treated with Triple Density Technology that resists degradation. The seamless construction can withstand many harsh chemicals and is 100% waterproof. FOOT FORM Contour-Comfort insoles offer an extra layer of stability, support, and comfort. The insole is lightweight and molds to the contours of the foot, the arch is lifted and the is a heel counter for support. The insole is replaceable, removable and washable. If you are in a cold place then you can use a deep-pile fleece liner for warmth and comfort. It fits most boots without insulation. The boot has a wide steel shank for additional support. The boot has wider and higher kick-off lugs. There is a notch at the back of the heel to easily remove the boots. You can pull on the boots easily using the top for a grip. The boot is reinforced at the critical stress points extending their durability.

SAFETY & FUNCTIONALITY

Servus MAX 75120 are recommended for work in barns, animal husbandry, food processing, cleaning services, farming poultry, fisheries industries. These boots have self-cleaning outsoles that squeeze the liquid and dirt from underfoot. This not only cleans the boots but also offers traction on a slick surface. The 15-inch-high shin protects the calves and shins from splashes, sprays, and spills. These lightweight soft toe boots cause less fatigue and are made to last. The toe and heel guard are extra thick to protect from abrasions and stubs These boots are made to last and have kick-off lugs for easy removal of the boots. The open pattern of the outsole helps self-cleaning of the boots. The debris and liquids wash off quickly. The center sole is dual compounded that cushions the foot from shock while offering traction. The insole is cushioned. The heel and arch are supported by this removable part. The shank is made of thick steel and is longer and wider offering enhanced support. The boot is chemical resistant due to the Triple Density Technology that retards the degradation of the boots.

SIZES

Servus MAX 75120 high boots are in olive color with a 15-inch shaft. The boot is available in US size 3 to 16.

ADDITIONAL FEATURES

Servus MAX 75120 is supported by a one-year warranty by Honeywell.

HIGHLIGHTS

  • Chemical resistant
  • Foot Form contour
  • Kick-off lugs
  • Thick toe and heel
  • Steel shank

12. Servus XTP 75109

These are chemical-resistant steel toe work boots for men. These are PVC and dipped neoprene work boots that offer Servus XTP 75109protection from oils, acids, and other chemical hazards in your work environment.

DESIGN & FEATURES

Servus XTP 75109 is a 15-inch-high boot that is 100% waterproof. It is made using Triple Density Technology. It has the removable FOOT FORM insole and a steel shank. The boot has the XTP outsole, kick-off lugs and toe, and heel guards. The boot is fitted with a steel toe and has the electrical hazard rated outsole. This is a chemical-resistant steel toe work boot. It is made of a proprietary material that does not degrade when in contact with organic chemicals. The boot features the Xtra Traction Performance (XTP) along with steel toes. The boots have a self-cleaning sole that behaves like a squeegee the debris and liquids from underfoot. These injection molded boots are ideal for indoor and outdoor work. The Foot form insole is contoured to conform to the foot. The steel shanks offer support to the heel and arch of the foot.

SAFETY & FUNCTIONALITY

Servus XTP 75109 is suitable to shield against chemicals found in the poultry, fisheries, forestry, food processing, petrochemical and agricultural industries. These boots offer waterproofing and protection from splashes, slips, and slips. The boot has a dual compound center sole that offers cushioning and traction. The open pattern of the sole allows for easy cleaning of debris. The perimeter of the outsole is for long wear and support. The boot comes with a steel toe that meets the ASTM standards for impact and compression. The yellow stripe at the midsole indicates that that is a steel toe boot. The boots are reinforced for long wear and durability. The boot is reinforced at the heel and toes with an extra layer of rubber. This is because the boots usually wear at these places and the sole. The reinforcement extends the boot’s life.

SIZES

Servus XTP 75109 high boots are in olive color with a 15-inch shaft. The boot is available in US size 3 to 16.

ADDITIONAL FEATURES

Servus XTP 75109 is supported by a one-year warranty by Honeywell.

HIGHLIGHTS

  • Triple Density Technology
  • XTP outsole
  • Steel shank
  • EH rated outsole
  • Steel toe

13. Tingley 27251.13 FLITE

Tingley believes in keeping hardworking folks safe. Thus, they have made comfortable and durable boots to Tingley 27251.13 FLITEwithstand wind, heat, dirt, dust, chemicals, rain and mud.

DESIGN & FEATURES

Tingley 27251.13 FLITE has a 15-inch black upper made of Aerex 1.5.5. This proprietary thermal insulative, chemical resistant and microcellular polymer makes the boots 40% lighter. The boot has a light upper and a cushioned heel. The boot has a slip-resistant nitrile outsole. The boot is fitted with a composite toe for safety and comfort against electrical hazards. The boot is fitted with a safety toe and a cleated outsole. The boot has a seamless upper that is water/liquid proof. The cleated outsole is made of nitrile rubber. It is slip-resistant and offers superior grip on wet and contaminated surfaces. There are air bubbles trapped in the material to keep your feet warm. Air bubbles act as insulators they keep you warm in cold and cool on heat. Aerex 1.5.5 is anti-fatigue as it is very light. It takes the weight off your back. A study says that every pound off your foot takes 5 pounds off your back. And you have to expand 5% less energy. The Calf-Relief Topline (CRT) is stylish and provides roomier calf space for easy on and off. The beveled heel reduces leg and back strain. There is a treadwear indicator that informs when half the treads are worn off.

SAFETY & FUNCTIONALITY

Tingley 27251.13 FLITE is ideal for food processing, dairy, meat, farming agro-based, chemical and petrochemical industries. The boot has a superior chemical resistance towards hydrocarbons, fats, acids, caustic alkalis, fats, etc. The boot very light to offers dexterity and maneuverability. The upper is fitted with a steel toe and has a cushioned heel. The outsole is made of slip and wear-resistant nitrile rubber.

SIZES

Tingley 27251.13 FLITE is available in US size 4 – 15 for men.

ADDITIONAL FEATURES

Tingley 27251.13 FLITE is supported by a 6-month warranty.

HIGHLIGHTS

  • Chemical resistant
  • Composite safety toe
  • Seamless upper
  • Chevron outsole

14. Servus SuperFit 11095

These are over boots designed to fit over shoes and leather work boots. The overboot is seamless and completely Servus SuperFit 11095waterproof. The boot is standard quality. It brings comfort and value.

DESIGN & FEATURES

Servus SuperFit 11095 is made by dual compounding. It molds the highly stretchable uppers to a long-wear slip-resistant outsole. There are reinforced bumpers on the toe and heel that protect the foot. There is an SF wide grip outsole that gives better footing and extra traction. There are extra-large molded kick-off lugs that help remove the boots. The boot has buttons that are molded to prevent leaks. There are tabbed grips stitched on the to the closing loops. This makes it easier to grasp and pull them on with one hand; even through the gloves. These gloves are ideal for use in muddy, industrial and wet conditions.

SAFETY & FUNCTIONALITY

Servus SuperFit 11095 offers added protection from hazardous chemicals. They can be worn while disposing of waste, handling hazardous liquids, etc. These boots have been tested to meet chemical requirements of commercial specification A-A-59520 and MIL-0-43995C. These PVC boots stretch over your daily wear boots. They can be worn over your daily boots. The stretch top and the long-wearing outsole are durable and waterproof. The Wide grip outsole offers added traction for a good grip on the floor you are standing on. There are open channels that squeeze out the debris and liquid while you walk.

SIZES

Servus SuperFit 11095 is available in US size 3 – 16.

ADDITIONAL FEATURES

Servus SuperFit 11095 is supported by a one-year warranty.

HIGHLIGHTS

  • Overboots
  • Chemical resistant
  • Dual PVC outsole
  • Waterproof

15. UltraSource Goliath 440050-14

UltraSource has been making processing and packaging equipment required by companies around the world. They UltraSource Goliath 440050-14deal with poultry, seafood, etc. UltraSource has been offering hundreds of products to meet your needs. These boots are another offering to work in these environments.

DESIGN & FEATURES

UltraSource Goliath 440050-14 is an injection-molded boot made from polyurethane. The boot is 100% waterproof and is water, fat, petroleum, oil, and chemical resistant. It helps you keep your operation sanitary. There are heel kick-off lugs at the back of the boot. These lugs help push off the boots easily. You don’t have to touch the contaminated boots with your hands. The outsole is cleated for superior slip resistance and better traction. The self-cleaning boots do not accumulate dirt, muck or mud.

SAFETY & FUNCTIONALITY

UltraSource Goliath 440050-14 are premium quality chemical resistant boots. These have steel toes that offer protection against falling or rolling objects. These boots offer protection from animal fat, proteins, red meat, and other harsh chemicals used in the abattoir. These boots are excellent for food processing facilities where seafood, vegetables, fruits, and meats are washed, prepared and packages. They would be ideal for herb nurseries, breweries, oil rigs, chemical plants, etc. These are injection molded PVC boots that are seamless to make them waterproof. There are kick-off heels that help wear and push off the boots easily.

SIZES

UltraSource Goliath 440050-14 has a 16-inch shank and is available in size 5 – 14.

ADDITIONAL FEATURES

UltraSource Goliath 440050-14 is supported by a 3-year warranty.

HIGHLIGHTS

  • Injection-molded construction
  • Seamless boot
  • Heel kick lugs
  • Steel toe
error:
Scroll to Top