When it comes to safety in the workplace, boots have somehow always been taken for granted. People think that any boot will do since most boots are made to be inherently robust, people always assume that it can handle anything thrown at them. Most people would be wrong at this point because not all boots are created equal. This is where Bates boots come in.
These boots have been around since 1885, the owner and manufacturer of Bates boots, Andrew Jackson Bates was credited with pioneering the wholesale type of footwear business. Bates footwear is primarily known as a maker of military and tactical boots, but later on, it made its name as well in industrial applications as well.
In 2016, Bates Boots announced its PowerSports line, which introduced its riding line of boots for motorcycle enthusiasts. Going against the grain in manufacturing standards, Bates Boots’ PowerSports line is made entirely in the USA.
If somehow you have doubts about how well the quality of a Bates boots holds up, bear in mind that this company has been awarded the contract for making footwear for the U.S. Armed Forces. If that is anything to go by, for sure the quality of whoever manufactured the footwear they use would be thoroughly tested while going through their paces. Any manufacturer who passes the stringent requirements of an entire nation’s armed forces will surely work just as well in civilian applications.
Read our latest guide about the best rockrooster boots.
Not just military boots
Bates Footwear is not just about military boots, but they cover pretty much any situation that requires anything more than your standard ordinary boots. These include riding boots for motorcycles, safety boots for construction, hiking, and outdoor boots, and of course, military applications.
There are many types of boots out there, and Bates Boots also come in a variety of footwear for almost any use possible all of them involving outdoor and hazardous conditions. This ensures that the Bates footwear one would be wearing is rated to take punishment. Here are the types of footwear that bate boots manufacture to date.
Read our complete guide about the best metatarsal work boots.
These types of boots or footwear (not necessarily boots) are those that are typically worn by law enforcement, emergency first responders, and public safety workers. These boots are usually made to endure tough circumstances and are often designed to protect the wearer from harm in the course of performing their duty. It is the standard for these types of footwear to offer a degree of protection from water, mud, sand and other hazards. They are often lightweight, breathable, flexible, has excellent slip resistance, have quiet soles, and have toughened upper parts to protect from sharp objects in the terrain.
This footwear is not that different from its tactical cousins but affords some extra features like being extra quiet and extra tough which is essential for combat or in deployments on a disaster area. They are generally made to be waterproof but at the same time breathable. Bates Boots have the unique advantage of being able to supply a nation’s armed forces with its footwear and with this alone, one can be assured that the boots have passed the rigorous testing before going into the market.
Safety toe boots
A steel toe boot is a type of work boot that protects the toes of the foot from being crushed, usually via a steel plate that also protects from punctures from below the foot. Although named as a steel toe boot, it doesn’t always have to be steel. Bates safety toe boots are sometimes made up of composites, aluminum, and steel.
Bates’s motorcycle boots are designed to be stylish both on and off the bike, aside from being breathable and waterproof at the same time. Their soles are usually oil and slip-resistant, with Bates paying close attention as to where these boots will be typically worn. Often, in and out of garages, these boots need to be able to weather the daily wear and tear of a busy motorcycle enthusiast, especially while on the move. The boots in this class of footwear protection need to be able to pass several safety parameters.
What gives Bates Boots the edge?
The footwear that this company makes more often than not find themselves in harm’s way most of the time as they are typically worn by combat personnel, first responders, construction workers, and motorcycle riders. As such they have to be able to pass even more stringent requirements than any other footwear that is designed for everyday use.
If the 130-year-old existence of this company still leaves room for doubt, we give you the reasons why they hold the standards. There are several requirements for a boot to be considered as a tactical or a safety boot, but below are the general characteristics of what a Bates boot consists of, as well as give you an idea as to why they are taking the lead in this business.
Part of what differentiates a good pair of boots from a mediocre one is having tough upper seams. Laces and zippers. These are either partially hidden or covered so they do not catch on to anything, hampering movement and causing an accident. The stitching is very sturdy and will never compromise your objective, whether one is on a mission of stealth, a rescue operation and even while in a combat zone.
A sturdy ankle support system is imperative if you would expect your foot to survive in harsh conditions. Leather is a number one choice in Bates Footwear’s arsenal of materials but more often than not, they combine it with other materials like TPU, Gore-tex, and other sturdy materials to achieve a level of protection that is flexible, waterproof and at the same time breathable.
Slip resistance properties become a premium when your footwear is going to be used in areas where both water and oil are present. These are especially useful when talking about motorcycle shoes, tactical footwear, and safety equipment. When in these situations, you will never know what terrain you may be coming onto next. This property is also extremely useful in combat situations.
Flexible and Quiet soles
A great pair of tactical or safety equipment footwear needs to be flexible enough to allow a certain freedom of movement. This parameter is essential for first responders and combat specialists. Being quiet is also a given especially with tactical boots as it makes no sense to wear squeaky shoes while on a military operation. Be it a rescue operation, a drill, or a combat operation, being able to move freely without any hindrance is going to be on the plus side.
Both in a tactical or a rescue situation, being able to move quickly is an advantage that could mean the difference between life and death. Bates Boots are usually made of composite materials that are carefully chosen together to ensure that the product arrives at that compromise between usability and having just the right weight and not sacrifice any safety feature.
Any serviceman will tell you that the kind of shoe that you wear out in the field can mean quite literally a world of difference. The kind of footwear especially when in operation can be quite telling on the troops. Bates boots once again rely on composites to give the right amount of breathability depending on the usage of the boots in question. You can be assured that whatever role you will be doing, there is a Bates footwear that will be perfect for that need.
We understand that making a choice in a sea of options can be a bit of a challenge. This is why we have taken the liberty of taking a look at 15 of the best Bates Boots available in the market today and made sure that the information you need is enough for you to make a choice.
Top 15 Best Bates Boots Reviews in 2019
Design, Materials, and Size
This boots measures 13” X 12” X 6″ and weighs less than 5 pounds these are easily one of the lightest tactical boots available today. Built with a mix of breathable Gore-Tex technology, leather, and a durable outsole, this particular item comes in a midnight black finish. The outsole comes with deep lugs that offer superior flexibility, protection from the elements, and an excellent grip. The boots are primarily made with ballistic nylon and leather for its upper, and durable athletic cement construction for its outsole.
Aside from the sturdy laces, the GX-8 has a zipper down the sides with a velcro strap. Making sure the boots stay put with just the exact fit and stay snug during the whole operation. This makes these boots a favorite among law enforcement and first responders because of its superior snug and customizable fit. The small zipper tucks neatly into the velcro tab, eliminating any chances of it ever getting stuck or caught up in anything while moving. The slip-resistant outsole provides excellent grip
A composite of waterproof leather and ballistic nylon as the upper construction with a gore-tex lining inside deliver the maximum waterproofing capabilities while remaining breathable. There is the inclusion of a YKK side zipper and a removable cushion insert allows flexibility especially in terms of keeping the boots clean.
This pair of boots are equipped with superior wicking technology with its Gore-Tex lining that ensures superior breathability while maintaining the waterproofing qualities of the boot.
- Breathable ballistic nylon with gore-tex lining is very comfortable
- The convenient nylon side zipper
- Athletic cement construction
- Highly flexible with solid non-slip grip
- Lack of a protective lip that extends over the toe area.
- Took a week of ‘breaking-in’ to bring the stiffness down
Design, Materials, and Size
The Bates Men’s Durashocks pair of boots measures 18” X 16” X 7″ and weighs less than 5 pounds, making it among the lightest work boots in its class to date. The materials are a combination of ballistic nylon commonly favored among work boots because of its abrasion resistance and breathability and genuine leather that is finished in black color. A YKK zipper along the sides makes the boot so easy to put on and off. A durable Goodyear rubber outsole that is complemented by the Bates patented DuraShocks system provides non-slip comfort even with hours of use.
The Goodyear rubber outsole has two DuraShock compression pads in each boot to provide comfort all day long. The compression pads are located in the heel and the forefoot of the outsole. A ballistic nylon lining and upper cover allow your feet to breath while being protected from all sides with durable outer leather that seamlessly blends into the sole. Side zippers that open up the whole length of the boot make it a breeze to get in and out of. These boots are the go-to boot for work, tactical gear, and even at play.
Ballistic nylon upper material and lining allow for maximum breathability and even in prolonged uses. This nylon is commonly used on flak jackets with pilot gear and is exceptionally abrasion-resistant. The Goodyear rubber outsole is equipped with DuraShocks compression pad comfort technology that absorbs the shock from running or walking and dissipate the forces to the outsole, resulting in less strain on the wearer. Genuine leather wraps your foot around in a protective and tough cocoon.
The Bates Men’s DuraShocks pair of boots is backed up by a 30-day comfort guarantee, wherein if you do not feel the comfort that the patented padding claims to give, they will give you your money back.
- Non-metallic composition does not interfere with electronic equipment
- Backed by a 30-day comfort guarantee
- Full-length cushion
- Ballistic nylon upper and lining offers maximum breathability
- Genuine wraparound leather
- YKK zipper makes it super easy to put on and take off
- The stiffness needs some time to break-in
Design, Materials, and Size
Measuring in at 12” X 8” X 4 with an amazing weight of 4.19 pounds, these tactical boots from Bates offer an unparalleled balance between the right amount of rigidity and flexibility where they are needed. Finished in a combination of rugged ballistic nylon with Bates DRYGuard lining, the tactical boot stays waterproof yet still maintains a degree of breathability. The side zipper is tastefully done in carbon fiber print that accentuates the tactical nature and design of the footwear. Genuine leather wraps around the sides and toes completing the utilitarian look of the shoes. This pair is finished in midnight black colorway.
The shoe is also equipped with Bates proprietary DRYGuard lining that is waterproof yet breathable to keep your feet comfortable even for prolonged periods of use. A side zipper runs the length of the boot up to the ankles makes putting the boots on and off faster. The lightweight rubber outsole is both water and oil resistant while its deep lugs give you traction in dry sand, wet and slick mud, or any urban terrain.
DRYGuard technology membrane is the lining used for this pair of boots. The lightweight rubber outsole is water and oil resistant with extra deep lugs for maximum grip on any terrain. High-quality and durable YKK zipper technology ensures longevity and years of use. A combination of ballistic nylon and leather materials add up to a rugged pair of boots that will last for years.
Bates proprietary DRYGuard lining allows for waterproofing but at the same time keeping your feet fresh by being breathable.
- DRYGuard waterproofing keeps boots dry short of a swim
- Breathable lining
- Tough leather and ballistic nylon upper
- Side zippers make it a breeze to get in and out of
- Lightweight at only 4.19 pounds
- Slip-resistant boots with deep lugs
- A little bit stiff when new
Design, Materials, and Size
The 5-inch Enforcer uniform boots from Bates has everything you would need from tactical footwear and has nothing that you don’t. From the durable stitching to the rugged Goodyear rubber outsole, everything exudes excellent quality. Ballistic nylon that’s resistant to abrasion and a genuine and sturdy leather completes the shoo as a whole. Its dimensions of 12″ X 8″ X 4″ and its weight of just 5 pounds makes it perfect for those looking for a smaller and lighter alternative to a full 8-inch boot.
These boots feature a well-thought-of removable rubber insole that makes it easier to clean and add more customizability in terms of replacing them with either memory foam or gel insoles. The half-boot configuration is an excellent alternative for those looking for a smaller and more flexible tactical footwear. The classic styling plus flexible construction allows more freedom of movement than that of a full boot. The lightweight rubber outsole has deep lugs for a secure grip on any terrain.
The boots are equipped with water and oil-resistant rubber outsole and have a cushioned EVA material in the midsole. The proprietary DRYGuard lining technology developed by Bates specifically for their tactical line of boots for optimal waterproofing and breathability. This keeps the user comfortable even for long periods of use. The leather lower construction is super-tough and very easy to clean.
This pair of boots from Bates features a removable and upgradeable insole that can be replaced with memory foam or gel insoles, depending on your preference.
- Extremely durable ballistic nylon upper
- Decent amount of breathability
- 5″ half boot design allows for more flexibility and freedom of movement
- Easy to clean leather finish
- Slip-resistant rubber outsole provides traction and grip
- Removable insert makes cleaning a breeze
- No side zipper, but not a deal-breaker
- Heavier than most 5-inch boots by a pound
Design, Materials, and Size
The Bates Shock 8-inch tactical boots have the trademark ballistic nylon and genuine leather combination on the outside but with added TPU hexagonal support for the nylon surface, infinitely adding to the already formidable anti-abrasive features of the nylon. Branding also took a more visible look with the Bates brand done in blue rubber with matching blue accents on the outsole below the shoe. This design combined with the hex pattern makes for an impressive aesthetic appeal for the intimidating footwear. It measures 11.5″ X 8″ and weighs in at an amazingly light 4.19 pounds.
These pair of boots not only look good but they feel great as well, especially with the proprietary Radius Heel design that allows for a greater range of movement in any terrain. The ventilated mono mesh screen makes the waterproofing membrane breathable and the TPU covering done in a hexagonal pattern makes wear and tear virtually non-existent.
It is equipped with a waterproof membrane that encloses the entire foot, with breathable mono-mesh protection on the tongue that is breathable. The multi-terrain outsole is provided with a nylon shank for added spring to your step and is oil and water-resistant.
This pair of boots has an added hexagonal pattern TPU mono-mesh screen protection and has an anti-fatigue multi-layered footbed designed to absorb maximum shock and prevent them from ever reaching your feet.
- Dual-density footbed ensure comfort even when used for long hours
- Radius heel design allows for unrestricted motion
- Ventilated mono mesh screen with TPU cover
- Genuine leather makes it extra durable
- Lightweight construction
- Excellent ankle support and overall protection
- Very stiff when new, needs at least a week of breaking in
- Narrow ankle and can be too snug
Design, Materials, and Size
The Defender DuraShock 8-inch boots from Bates has that classic look but is anything but. The measurements of 18″ X 16″ X 7″ and the weight of 5 pounds puts these boots on the average size-wise. This pair of the well-made boot has a combination of ballistic nylon and leather on the outside with a black colorway. These are advertised as the ultimate work boots with emphasis on comfort even with long hours of use. It does not have a steel or composite toe and this makes it great as an everyday work boot as it is lighter.
The boots are equipped with the proprietary Bates DuraShocks comfort system that incorporates twin compression pads that serve as shock absorbers, protecting your knees, lower back, and hips as you go about your daily grind. This boot has no composite toe though so there is a need to be careful and this does make this safety boot lightweight. Another great thing about this pair is that it can be re-soled because the upper sole and the outsoles are stitched directly together for maximum possible durability.
The Bates Defender is waterproof and clad in ballistic nylon for its upper cover and wrapped in leather for the lower. Its long-lasting outsole is made by Goodyear and is a welt construction. It is also equipped with DuraShocks compression technology that provides more comfort even when used for long periods. The shoes are equipped with a full lining and a removable and replaceable cushion.
This pair of shoes is Backed by a 30-day comfort guarantee and has passed the SATRA WTM 144 test for slip-resistance. It is non-metallic and doesn’t register on any electronic surveillance.
- Polishable toe
- Oil and water-resistant
- Gore-Tex waterproof lining
- Goodyear rubber outsole
- 30-day comfort warranty
- Comfortable compression pads on the insole
- Genuine leather toughness
- Does not have steel or composite toe protection
- DIfficult to wear and remove
- No side zipper
Design, Materials, and Size
The Delta side zip from Bates is what this shoe manufacturer claims as to the ultimate in customizability when it comes to fit. On the outside, this 6-inch boot has all the trademark ballistic nylon upper combined with a tough leather wrapping the foot area. The lower shaft has that distinct side zipper common to Bates products along with a flap and a velcro to hide the zipper profile that prevents snagging. Finished in an all-black scheme, it measures 12″ X 8″ X 4″ and a weight of 5 pounds. A breathable mesh lining affords a measure of waterproofing while making the whole shoe breathable.
While the Bates Delta boot may have similarities on the outside, it features the Bates proprietary ICS Technology that grants you to adjust and select the level of comfort that feels right for you. A disc sits inside the heel that can be rotated depending on the comfort level that you desire. It really is as simple as lifting the insole out, rotating the disc underneath and you get that exact level of comfort you are looking for. The great thing is you only have to do this once. The full-grain leather and abrasion-resistant ballistic nylon are effortless to clean and maintain. The ICS system plus adjustments to the lace allow for a custom fit that is not achievable previously. This combination makes these pair of Bates boots among those at the very top that scores high for comfort.
ICS disc adjustment system allows for complete customization on the hardness level of the heels. Ballistic nylon and a breathable lining make this among the most comfortable work shoes ever. The athletic molded rubber sole gives excellent grip and flexibility while offering slip resistance.
Oil and water-resistant rubber outsole that has the ICS system at its core makes it possible to adjust the hardness level of the insole.
- Unparalleled customizability of fit
- Comfortable insole
- Fits snugly
- Side zipper allows for faster getting in and out of
- Velcro strap hides the zipper preventing it from snagging
- Adds a bounce to your steps, literally
- Durable leather
- Can be a bit warm
- Narrow fit on the ankles
Design, Materials, and Size
Just getting the go-ahead to put the name of one of the world’s most powerful army is already a telling testament to how well these boots are made. The USMC Hot Weather boots from Bates are finished with Wolverine Warrior leather and complemented with ballistic nylon for maximum breathability. These boots are made in the USA and they never fail to advertise that fact. The footwear’s dimensions are 12” x 8” x 4” and weight is 5 pounds. The color is done in a khaki colorway that just seamlessly blends into the USMC desert camo uniform. Being made for this branch of military doesn’t mean you cannot buy one though as they can also be most useful in out of combat scenarios, such as tactical or outdoor use. As expected, the boots are extremely well crafted and will last for many years.
It should go without saying that if these boots can take the beating of going into a warzone, it could pretty much withstand anything that you can throw at it right? Looking at the stitches and the Wolverine Leather wrapping up the shoes, it is easy to say that it can. The addition of DuraShock compression pads inside the soles between the outsole and the insoles makes these boots one of the most comfortable to wear in any condition. The torsional rigidity is just right to keep your ankles supported when running or performing maneuvers. Because it is made for hot weather in mind, the combination of genuine leather and nylon offers maximum breathability, keeping your feet aerated even in prolonged usage.
Ballistic nylon and leather combine for a toughened exterior capped by a rubber outsole that is both oil and water-resistant. Construction and rigidity allow for functionality in almost any condition.
As an additional feature, these particular Bates boots are entirely manufactured in the USA
- No need to break in as they are comfortable from the start
- Lightweight and airy even on prolonged use
- Tough combination of nylon and leather
- Comfortable DuraShock lining inside the soles
- Durable oil, water, and stain-resistant rubber outsoles
- Slip-resistant rubber outsoles with deep lugs for maximum traction
- More expensive than a regular pair of work boots
- Large sizing
Design, Materials, and Size
Bates is known for making ultra-durable footwear for one of the world’s most significant armed forces, and the Bates Men’s 9-inch steel toe boots for the US Navy is a prime example of the quality that goes into creating one such footwear. Made almost entirely of full-grain leather, this 9-inch boot is all black and all business. The rubber outsole is made by Vibram and is renowned for its water-resistant properties and excellent grip. The shoe measures 12″ X 8″ X 4″ and weighs about 5 pounds
While the soles are undoubtedly waterproof, the boots as a whole are not fully waterproof. The steel toe is ASTM F2413-05 rated and can withstand pretty much anything thrown into it. These boots excel as an everyday work boot once it is broken in it is very comfortable. Adding Bates proprietary DuraShocks technology to the mix only adds to the comfort level of these boots, and no wonder it gained traction even among civilians.
The boots feature a steel toe and Vibram rubber outsoles that provide water and oil resistance, providing traction even in slippery places. DuraShocks technology developed by Bates makes this pair of boots among the most comfortable to wear even for long periods.
The ASTM F2413-11 rated steel toe allow these boots an excellent choice for work in ship engine rooms and in any hazardous work environment where falling or crushing items may fall on your toes. The shoes also feature a rubber outsole by Vibram for traction in slippery and wet conditions and are assembled and made in the USA.
- Durable leather with a nylon moisture-wicking action lining
- Non-slip grip and traction with the Vibram outsole
- Comfortable even for prolonged use with the DuraShocks compression pads
- Leather takes an excellent shine when polished
- Just the right amount of rigidity to support the ankles on those long days
- The all-leather upper and lower parts can be hot on prolonged use
- Takes some breaking in for the stiffness to go away and be more comfortable
Design, Materials, and Size
These boots from Bates are AR70-1 compliant, meaning it is specifically built to military specifications, and for most people, that is enough as anything that can survive combat scenarios for sure will be able to tackle wear and tear. The design is pretty straightforward, but the flesh-out cattle hide leather with abrasion-resistant nylon is a handsome mix and is quite pleasing to the eye. The look is all business and utilitarian, which suits the boots just fine. The double stitching is a good indicator of how much punishment the boot can take. The dimensions of the shoes usually are more significant at 18″ X 16″ X 7″ and weighs in at 5 pounds. The colorway is authorized to be worn with OCP or the Operational Camouflage Pattern uniform.
The cattle hide leather, ballistic nylon, and rubber outsole combine into footwear with just the right torsion rigidity to be able to gain unrestricted moved that would otherwise be exhibited by other shoes in this class. The rubber outsole has deep lugs to allow traction in almost any terrain, and its non-slip grip assures solid footing in any scenario. The whole boot has a breathable lining with padded collars that add to the comfort. Aside from those, the shoe also has cushioned EVA midsole for added comfort.
These pairs of boots have medial side vents that add to its breathability even after prolonged use. This feature is a couple of small holes in the middle part of the shoe that allows air to breathe out as one moves. The footwear is also equipped with an ASTM F2413-11 rated composite toe for protection.
- The addition of the composite toe protection
- OCP compliant colorway
- The addition of side vents allow even more breathability
- EVA midsole for added comfort
- The durable rubber outsole will last for years
- Water and oil resistance allows for a more stable grip
- Not an exact fit, must order one size above as it could be snug
- The composite toe makes the size smaller
Design, Materials, and Size
Measuring in at 18″ X 16″ X 7″ and with each boot weighing in at 1.25 pounds each, these pair of boots from Bates are among the lightest and most comfortable tactical shoes. The look is classic and is necessary to conform to any OCP (Operation Camouflage Pattern) regulations of any branch of law enforcement or military bodies. While this may be true, there is no mistaking the athletic nature of the shoe with its nicely contoured outsole. Water and oil-resistant rubber outsole allow for even more slip resistance during movement and durable ballistic nylon and genuine cowhide leather finished in an all-black color complete the boots.
The Siege side zip has a sock-like breathable liner and a lightweight cushioned midsole allows for an athletic performance fit. Slip-resistant outsoles make these boots exceptionally agile when in use. The side zipper makes it super easy to get in and out of even without unlacing the strings. The genuine leather takes to polish very well and the feel is more like that of a running shoe than a tactical boot. Compared to other shoes in the class, the Bates Siege Boots is relatively light.
The boots have a YKK brand side zipper for easy getting in and out of the shoes, complete with a strap to hide the handle so it won’t snag into anything while in operation. A cushioned removable insert with the proprietary Cleansport NXT for odor control is added for maximum cushioning that is complemented by a cushioned EVA midsole.
The soles are done with a Strobel/Cement Construction that is generally used for running shoes or sports footwear and this adds a ton of flexibility to these shoes.
- Constructed like an athletic shoe
- Very lightweight and fits snugly without any give
- A rigid body which supports the ankle during movement
- Very quiet outsole and does not register on electronic surveillance
- Easy to clean and polishes well
- Also great for motorcycle use
- The upper part has a bit of excess leather, making the shoe look fat
- The plastic filler between the ballistic nylon outside and inside provide a lot of stiffness
Design, Materials, and Size
The quarter-boot design of the Bates ZR-6 makes it ideal for law enforcement or any job that requires one to be on their feet for most of the day. Measuring 13″ X 6″ X 4″ and weighing in at about 1.5 pounds, this is among the lightest boots in its class. Ballistic nylon and genuine cowhide leather wrap up your feet in a secure grip. Its lightweight cement construction further adds to its athletic feel. The low profile makes for almost unrestricted movement while providing critical ankle support during any activity. The boots are finished in an all-black colorway that takes a liking to polish.
The boots themselves are airport friendly with a nylon/fiberglass shank instead of the usual metal. While this provides zero interference to electronics the major bonus is added flexibility in movement. The oil and water-resistant rubber outsole provides much needed forward traction and grip. The removable mesh-lined EVA insole makes it easy to clean or replace with other insoles, such as gel or memory foam depending on your preference. The moisture-wicking mesh lining keeps your feet aerated even after prolonged periods of use.
Breathable ballistic nylon and genuine cowhide leather covers the upper part of the boots while a rugged and durable rubber outsole takes care of your feet from underneath with a fiberglass shank in between. A removable and cushioned mesh-lined EVA insert adds to the comfort of these boots even when used for long hours.
These boots meet the SATRA WTM144 test for slip-resistance as well as having a fiberglass shank in its midsole, providing zero interference electronically and making it ideal for work in high-security areas such as airports.
- Ballistic nylon meshed with the genuine leather allow for breathability even when worn for long hours
- Mesh-lined EVA removable cushion insert makes it easier to clean
- Easy to clean and polish genuine cowhide leather
- The rubber outsole is oil and water-resistant
- Athletic cement construction allows for more flexible outsoles
- No side zippers common to Bates boots
Design, Materials, and Size
The Velocitor is among the most popular and widely used boots in the Bates stable of footwear, and this particular comes in a variety of colors. The reason is that this pair of boots can be used practically for anything. As tactical footwear, though, the all-black version is the go-to for law enforcement professionals. Made of a combination of waterproof full-grain leather, ballistic nylon, and TPU material, the shoe itself is a well-rounded performer in all aspects. At 12″ X 8″ X 4″ and weighing in at less than 2 pounds, it is a relatively lightweight and compact as far as tactical boots go. The TPU protection in the toe of the boot extends to the sides in a beautifully done beautiful pattern.
Ballistic nylon is exceptionally resistant to abrasion, and when you combine it with the full-grain leather and TPU material, encompassing the boots from the toe adds even more durability to the shoe that translates to more years of usage. This exoskeleton protection also adds to the torsional rigidity of the boots, allowing one to move in high speeds and maneuvers with more than adequate ankle support. The breathable lining also serves as the waterproofing membrane that protects your feet from being soaked in wet situations. The EVA cushioned midsole and a heel arch make this the ideal footwear for jobs that require the most time of being on someone’s feet.
These boots from Bates feature a TPU exoskeleton hugging the shoes from the toe tip down to the sides, aside from the ballistic nylon and the genuine full-grain leather that’s wrapping the entire footwear. A cushioned EVA midsole plus a heel arch allows maximum freedom of movement.
Velocitor has an exoskeleton mesh protection that begins as a durable toe bumper protection and extends to the sides of the boots. The full rubber outsole has passed the SATRA WTM 144 test for slip resistance rating.
- Requires no break-in period, very comfortable the first time
- The toe bumper makes the shoe scuff resistant and very useful for kicking down doors or barriers
- The Bates-Dry waterproof membrane makes the shoe water-resistant
- Soft mesh lining provides comfort even when on prolonged use
- Cement construction commonly used for athletic shoes allow for more flexibility
- Challenging to line up the zippers sometimes
Design, Materials, and Size
This lightweight USMC approved pair of boots from Bates features Wolverine Warrior Leather, which is also known as the ‘green’ leather in terms of product sustainability. The USMC-certified boots are in the Coyote colorway which is approved by the USMC in terms of complying with its OCP (Operation Camouflage Pattern) and can be used as part of their uniform. The 1680 Denier nylon and Wolverine Warrior Leather construction is specially designed for hot weather operation, hence the colorway of sandy color. The shoes are relatively lightweight and measurements are 18″ X 16″ X 7″ and weighs less than 2 pounds
Equipped with a Vibram Extreme Rubber lug outsole, these pair of boots has excellent slip resistance. The breathable Dri-Lex liner keeps feet cool and dry while being comfortable with the Bates DuraShocks compression pad technology that absorbs shock as you use the footwear. These special compression zones are located in the heel and toe part that preserves energy and prevent aching legs.
Wolverine Warrior and 1680 Denier nylon top combo with a rugged rubber Vibram outsole repel dirt, oil, and water. The Dri-Lex liner has a wicking action that ensures feet stay dry and cool even in prolonged use.
The Bates is USMC Marine corps certified and can be worn as part of their Operation Camouflage Pattern during exercises and on the actual field, specifically, the Berry Amendment compliant for use with OCP Scorpion uniform and is made in the USA. The Boots also come equipped with an ASTM F2413-11 Rated Steel Toe for added protection.
- The inclusion of an ASTM F2413-11 rated steel toe
- Slip-resistant Vibram rubber outsole
- Dri-Lex liner keeps feet dry and cool at the same time
- Made in the USA
- USMC certified
- Oil, water and dust resistant
- Super durable direct attach construction
- Can be narrow on the ankles so order a bigger size
- Cannot be re-soled
Design, Materials, and Size
The Nitro work boots from Bates offer something rare in the world of work boots and that is the experience of a fit that is custom-tailored to fit your fit just the way you like it with the ICS+ technology that allows you to control how hard or soft the hardness of the shock resistance cushion is by directly reaching in and lifting the removable insole and adjusting a disc. The mesh nylon and leather wraparounds combine to form a protective shell around your feet as you go about your daily tasks. The full-grain leather can easily be polished while its measurements of 12″ X 8″ X 4″ and weight of fewer than 2 pounds makes it ideal for running day-to-day tasks.
Having that adjustable bounce certainly goes a long way in keeping your feet comfortable even after a prolonged working session. It is not just the shock absorbing and force dampening properties of the built-in ICS+ system but also the upper nylon breathable lining that keeps your feet cool and dry. The rubber outsole is oil, water, and dust resistant, giving you a firm grip and traction always on any terrain.
The highlight of the Nitro is the presence of the ICS+ Adjustable Comfort Technology, which allows you to choose the settings that are right for your feet measurements. A disc that is injected with nitrogen can be easily rotated along for zones that control how hard the shock-absorbent properties are and works very well towards reducing foot fatigue, especially when standing working for long periods of hours. The midsole is an EVA cushion with a fiberglass shank.
This pair of boots are equipped with the ICS+ Adjustable Comfort Technology, making them very comfortable even after long hours of use.
- Leather and mesh combine for that fresh and dry feeling
- ICS+ system ensures a snug fit
- Has an EVA cushion that adds even more to the comfort factor
- The shaft has padded collars for added cushion
- Minimal heel drop
- Needs at least a week of breaking in